Hummer H3 2015 Owner's Manual page 48


If battery wire terminals are damaged or corroded, they should
be replaced or cleaned as necessary.
 Failure to do so may cause them to overheat during operation.

4. Tighten all wiring connections to the proper specification (see below).
Make certain there is good contact with the terminals.
Proper Torque Values for Connection Hardware:
Flooded
VRLA
Do not over tighten terminals.
Doing so can result in post breakage, post meltdown, or fire.
Copyright © 2009-2014 American Custom Golf Cars, Inc.
CAUTION!
Side 70-90 in-lbs
Wing nut 95-105 in-lbs
LPT 95-105 in-lbs
Stud 120-180 in-lbs
LT 100-120 in-lbs
Button 90 to 100 in-lbs
LT 100-120 in-lbs
WARNING!
Page 48