Summary of Contents for Caltron Industries MD-15
-
Page 1: User Manual
Caltron Industries, Inc. Copyright © 2006-2007 15” MPEG LCD Display (MD-15) User Manual Version: 1.6 Feb 21, 2007 Revision History... - Page 2 Revision Author Date Description Peter Lin Jan 02, 2007 1. Initial draft. Peter Lin Jan 27, 2007 1. Add file trees Peter Lin Feb 27, 2007 1. Add operating instructions Johnny Young March 3, 2007 1. Add user instructions and change format.
-
Page 3: Table Of Contents
Table of Contents 1. Introductions ................. 1 1.1 Safety Instructions....................1 1.2 Features ........................4 1.3 Notice ........................5 1.4 Check List ......................6 1.5 Outward Appearance..................6 2. Installation Procedure ............6 3. Building Content File Structure .......... 8 3.1 Create Rotary Counter File Structure ..............7 Monitor Display Control ………………………...……………………..8 On Screen Display... -
Page 4: Introductions
1. Introduction 1.1 Safety Instructions 1.1.1 Read this user manual All safety and operating instructions in this user manual should be read before operating the product 1.1.2 Keep this user manual This user manual should be retained for future references. 1.1.3 Head Warnings Be cautious about warning signals on the product. - Page 5 1.2.0 Heat Ventilation There is heat ventilation on the top and the bottom part of the product. To avoid overheating, do not block any ventilation openings with objects g. carpet). For the best ventilation, allow the product to have 10cm radius of the opening. 1.2.1 Grounding or Polarization This product could be equipped with an alternate plug.
- Page 6 1.2.7 Replacement parts When replacement parts are required, be sure that the technician uses replacement parts specified by the manufacturer or parts with same features. Unauthorized substitution may result in fire, electric shock or other hazards. 1.2.8 Safety Check Upon completion of any service or repair to this product, ensure safety checks performed by qualified technician for proper operating condition.
-
Page 7: Features
1.1 Product Description The digital signage unit refers to the use of digital technology by sending messages and images to a display in public places. With the rise of digital signage, it not only replaces the traditional marketing approaches, but it also enhances the quality of communication. -
Page 8: Notice
• Semi-hidden Power on/off and other adjustment (OSD) switches • IR Remote control sound level • 100 x 100 mm VESA standard display signage mounting holes easily match third party mounting kits • Integrated speakers for audio 1.3 Notice 1. Do not touch the LCD panel surface with sharp or hard objects. 2. -
Page 9: Check List
1.4 Check List Interactive Digital Signage Unit Accessory 1. Power Adapter 2. Power Cord 3. Remote Control If any items are missing or damaged, please contact your dealer immediately. 1.5 Outward Appearance 2. Installation Procedure Take out the power cord and adaptor from the accessories case. Connect the plug of adaptor into the power jack of the media player. - Page 10 Installing/Removing Battery of Remote Control Note: The plastic sheet plays a protective role when there is no the battery in the remote control. Please remove the plastic sheet before using the remote control. Remarks: Type of the remote control battery CR2025. Please check the polarity of the battery before installing.
-
Page 11: Building Content File Structure
Rotary Counter 3.2 PLAY SPECIFIC FOLDER You can set MD-15 to solely play one specific files from one of eight different folders. By adjusting the rotary counter switch to specific number, the contents under that numbered folder will be played repeatedly. You can create upto eight folders. - Page 12 3.2.1 Create the file structure first from your computer. 1. Create eight new folders and name them from “1” – “8”. 2. Unlimited multiple files can be put in any folder from “1” to “8”. Suggest adding number prefix to file names. For example: 02_flowers.mpeg. Function: Play your desired folder by adjusting the rotary counter to be “1”, “2”, “3”, “4”, “5”, “6”, “7”, or “8”...
-
Page 13: Monitor Display Control
4. Monitor Display Control Keypad is located at the back of the display. Recommend using a stylus to press the buttons. 4.1 Keypad Definition Buttons Function Right / Decrease Signal Switch Left / Increase Main Menu / Enter Auto Adjust Power On / Off 4.2 Keypad Lock Combination Press Button 3 &... -
Page 14: On Screen Display
5. On Screen Display 5.1 Main Menu 5.2 OSD Operation Procedure Press “Menu/SW3” button to call out the Main Menu Press ▲▼/SW1,2 to select Main Menu Press “Menu/SW3”to access Sub Menu Press ▲▼/SW1,2 to select Sub Menu Press “Menu/SW3” to access the user setting Press ▲▼/SW1,2 to adjust the setting Press “Menu/SW3”... - Page 15 S VIDEO -- Select S-Video signal input (multi-signal input model only) RECALL -- Recall factory default input signal setting RETURN -- Return to main menu H POSITION Adjust screen Horizontal position DISPLAY V POSITION Adjust screen vertical position ADJUST CLOCK Correct flickering text or lines (horizontal) PHASE...
- Page 16 TRANSPARENCY Adjust the transparency of OSD RECALL Recall factory default OSD setting RETURN Return to main menu English Adjust the OSD language to English LANGUAGE Frangais Adjust the OSD language to French Deutsch Adjust the OSD language to German Italiano Adjust the OSD language to Italian Espanol Adjust the OSD language to...
- Page 17 (OPTIONAL) Recall Recall factory default audio setting Return Return to main menu Exit Exit OSD...
-
Page 18: Frequesnt Ask Questions (Faqs)
4. Frequent Ask Questions (FAQs) Picture too dark: ● Check the brightness. ● Check the contrast. ● Check whether LCD is damaged. Failure of remote control: ● Check the power. ● Check whether the battery is tightly installed. ● Check whether the battery is properly installed. ●...