Signatrol Professional weather station Operation Manual

Professional weather station wind and air pressure

Advertisement

Quick Links

www.signatrol.com
Signatrol Ltd, UK
Tel: +44 (0)1684 299399
PROFESSIONAL WEATHER STATION
(WIND AND AIR PRESSURE)
Operation Manual

About this manual

Thank you and congratulations on selecting this professional weather station! We
are positive you will enjoy the benefits of accurate weather readings and the
precise radio controlled time information that our instruments offer.
This manual will guide you step-by-step through setting up your device. Use this
manual to become familiar with your professional weather station, and save it for
future reference.
Glossary of Common Terms
DCF/WWVB/MSF
The DCF, WWVB or MSF time signal is an AM modulated time-of-day signal
broadcasted by the Federal Government of Germany, NIST from USA or National
Physical Laboratory. The time base is generated from an atomic time generator
which is accurate to 10 billions of one second.
LCD
"LCD" is an acronym for "Liquid Crystal Display". This is a common type of
display screen used in televisions, computers, watches, and digital clocks.
BAROMETER & BAROMETRIC PRESSURE
A barometer is a device that measures the pressure of the air pushing on it—this
measurement is called the barometric pressure. We don't actually feel the
barometric pressure because the air pressure is pushing equally in every direction.
RELATIVE AIR PRESSURE
Relative air pressure is the same as the barometric pressure. The calculation of
relative air pressure is a combination of the absolute air pressure and the altitude.
ABSOLUTE AIR PRESSURE
Absolute air pressure is the actual air pressure on the barometer without regard to
altitude.
INCHES OF MERCURY (inHg)
Inches of Mercury is the common unit of measurement for air pressure in the
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Professional weather station and is the answer not in the manual?

Questions and answers

Summary of Contents for Signatrol Professional weather station

  • Page 1: About This Manual

    This manual will guide you step-by-step through setting up your device. Use this manual to become familiar with your professional weather station, and save it for future reference. Glossary of Common Terms...
  • Page 2: Lcd Display

    International System (SI) of measurement. The hectopascal holds the same value Important Note: The Professional weather station includes a base station (receiver), a transmitter unit, one wind direction sensor, one wind speed sensor, one rain gauge, USB cable and a PC software package on CD-ROM.
  • Page 3: Table Of Contents

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 1. Weather Forecast 2. Barometric Pressure 3. Barometric trend 4. Date 5. Memory 6. Time 7. Indoor Humidity 8. Indoor Temperature 9. transmitter low battery indicator 10. Outdoor reception signal 11. Outdoor Humidity 12.
  • Page 4 Signatrol Ltd, UK Tel: +44 (0)1684 299399 1) Insert 2XAA 1,5V alkaline rechargeable batteries first into the battery compartment of the remote sensor and immediately afterwards 3XAA 1,5V alkaline batteries in the base station, observing the correct polarity. When battery is first inserted, the red LED light on the remote sensor will be light up for 3-4 seconds.
  • Page 5 Signatrol Ltd, UK Tel: +44 (0)1684 299399 4. The best condition for reception is at night, between midnight and 6:00am – when there is less atmospheric interference. Note: Commonly the radio communication between receiver and transmitter in the open field can reach a distance of up to 330 feet providing that there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc.
  • Page 6 Signatrol Ltd, UK Tel: +44 (0)1684 299399 Mounting the dual wind sensor holder Mounting the rain sensor Thermo-hygro sensor with solar panel - 6 -...
  • Page 7 Signatrol Ltd, UK Tel: +44 (0)1684 299399 Mounting the thermo-hygro sensor Fix the whole set to a pole same as rain sensor with the two adjustable hoops. The anemometer’s cable is connected to the input on the wind direction sensor.
  • Page 8: Program Mode

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 For best results, direct solar panel as follows: Solar panel facing north if you reside in the southern hemisphere; Solar panel facing south if you reside in the northern hemisphere. Positioning Once you have verified that all of the components of the weather station are working, they can be positioned in their permanent places.
  • Page 9 Signatrol Ltd, UK Tel: +44 (0)1684 299399 12/24h time display select (default 12 hours) DST ON/OFF (this function is only available for WWVB version, while for DCF version this feature is not activated) Manual time setting (hours/minutes) Press the ▲(UP) or ▼(DOWN) key to set the value.
  • Page 10: Weather Forecast

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 - Press the MENU key the third time to select the PRESS HISTORY section, PRESSURE HISTORY section digit will start flashing. Press the ▲(UP) or ▼(DOWN) key to select the bar graph time scale between 12hrs and 24 hrs for pressure history.
  • Page 11: Date

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 Weather forecast symbol: Sunny Partly Cloudy Cloudy Rainy Snow Storm Snowstorm Clear Night Cloudy Night For every sudden or significant change in air pressure, the weather symbols will update accordingly to represent the change in weather.
  • Page 12 Signatrol Ltd, UK Tel: +44 (0)1684 299399 icons. Notes to storm threshold setting The storm threshold means the weather icons (rain and clouds) will begin to flash indicating a dramatic change in pressure, indicating a storm. Similar to the general pressure sensitivity setting it is possible to adjust the storm threshold sensitivity form 3-9hPa (default 4hPa).
  • Page 13 Signatrol Ltd, UK Tel: +44 (0)1684 299399 The indoor temperature low alarm setting. Press the ON/OFF key to on/off the alarm. If alarm is enabled, an alarm symbol appears in the display indicating the alarm function has been enabled Reset the maximum indoor temperature value.
  • Page 14 Signatrol Ltd, UK Tel: +44 (0)1684 299399 UV index The UV intensity indicators is to show the UV intensity level from 0-12 UV Index Very high : 10, 11, 12+ High : 7, 8, 9 Extreme : 5,6, Moderate : 3, 4,...
  • Page 15 Signatrol Ltd, UK Tel: +44 (0)1684 299399 MAX icon are flashing, hold the ENTER key for 3s, the maximum value will be reset to current reading. Note: Press the ON/OFF key to on/off the alarm. If alarm is enabled, an alarm...
  • Page 16: Memory

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 Memory modes Press the HISTORY key to activate history data toggle display, Press ▼ (DOWN) key to toggle forward to see earlier weather history data together time stamp, press ▲(UP) key to see later history weather data. When history data...
  • Page 17: Time

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 Connections and Software The wiring between Weather Station and PC takes place by means of an included USB cable. The EasyWeatherPlus software package, also included in the shipping contents, must be installed on the PC.
  • Page 18: Specifications

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 When memory is full, it will take about two minutes to upload all history data into PC and it takes another two minutes to process all history data for graphic display. Specifications...
  • Page 19 Signatrol Ltd, UK Tel: +44 (0)1684 299399 Measuring interval thermo-hygro sensor 48 sec Measuring interval UV sensor 60 sec Measuing interval Light sensor 60 sec Water proof level IPX3 Indoor data Measuring interval pressure / temperature 48 sec Indoor temperature range --60 C (14 ℉...
  • Page 20: Indoor Humidity

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 EasyWeatherPlus PC Software User Manual 1.0 General Information This Weather Station is a high quality, easy to use weather monitoring system that reads, displays and records the weather data from internal as well as external sensors.
  • Page 21 Signatrol Ltd, UK Tel: +44 (0)1684 299399 Note: The graphic function needs the software to be installed under the administrator account. If it is installed under limited user accounts, the graphic function of the software might not be working correctly.
  • Page 22: Function Button

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 When base unit is connected to PC, the icon of will be displayed. If no base station is connected, the icon of will be displayed. Function button: : Display and setup system configuration This section is used to set up PC software display, base station units, as well as able or disable the corresponding alarm function.
  • Page 23 Signatrol Ltd, UK Tel: +44 (0)1684 299399 : Display and modify system alarm value This section is used to set the desired time, high or low alarm value for the base unit. Once you made your choice, choose Save to make the setting effective. If you don’t want to make any change, just press Cancel and exit without change.
  • Page 24 Signatrol Ltd, UK Tel: +44 (0)1684 299399 : Display min and max history value This section is used to display the recorded min and max value recorded with time stamp. Min/Max reset can only be done through key operation on the base station.
  • Page 25 Signatrol Ltd, UK Tel: +44 (0)1684 299399 : display history detail data This section is used to display recorded history data in a spread sheet. If you wanted to see all history data in a desired time period, choose the time duration and press Search to reload the history data.
  • Page 26 Signatrol Ltd, UK Tel: +44 (0)1684 299399 : display graph data In this section, you can see the history data plotted in graph format for easier observation. If you want to see more details, just use your mouse to select the area...
  • Page 27 Signatrol Ltd, UK Tel: +44 (0)1684 299399 What to do if graph function is not working This is the most encountered problem with this software. To make the graph function working properly, please check the following step: 1, find the folder where the “EasyWeatherPlus.exe” file is located 2.
  • Page 28: Rainfall

    Signatrol Ltd, UK Tel: +44 (0)1684 299399 Special Notes about time synchronization between PC and sub-station: The PC software obtained its own time scale through the time interval marker from the base station history data, and the PC software automatically synchronizes the weather data with a time stamp calculated.

Table of Contents