Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for coM.sat PCI-GSM-Board
- Page 1 PCI-GSM-Board USER MANUAL...
-
Page 2: Table Of Contents
User Manual coM.sat PCI GSM Index Index ..............1 Introduction ........... 2 1.1 Equipment description ....................2 1.2 Feature survey ......................2 1.3 Technical requirements ....................2 1.4 Security advice for user ..................... 3 1.4.1 Security in air traffic ........................3 ... -
Page 3: Introduction
PCI GSM Introduction 1.1 Equipment description The coM.sat PCI GSM-Board is meant to serve as an interfacing tool for the GSM- network, that gets your software-based telephone system ready for GSM. The coM.sat PCI GSM-Board is aligned with Linux OS and offers a kernel-independent driver as well as a channel driver for Asterisk, already included in the scope of supply. -
Page 4: Security Advice For User
1.4.6 Measures in case of loss / theft In case the coM.sat PCI GSM, the Cellular Engines or the used SIM-cards are no longer available due to loss or theft, please inform your provider immediately in order to avoid eventual abuse or fraud. -
Page 5: Transportation
User Manual coM.sat PCI GSM 1.4.7 Transportation The packaging provided by deliverer when receiving the equipment does not guarantee full protection against crushing and beating during transportation. Therefore an additional packaging should be provided for further transportation. In case the equipment was stored within a cold environment, it should slowly be warmed up until it reaches ambient temperature, in order to avoid humidity issues. -
Page 6: Installation Of The Pci Board
Before beginning with the installation, turn off the computer, unplug its network cable and open its case. In order to install the coM.sat PCI GSM Board an available PCI slot is needed. 1. Choose an available PCI Slot and remove... -
Page 7: Upgrading Of The Pci Board To 4 Channels
PCI GSM Upgrading of the PCI Board to 4 channels To upgrade the coM.sat PCI GSM Board first you will have to remove it from your computer. Before doing so, turn the computer off, unplug its network cable and open the case. -
Page 8: Getting The Pci Board Into Operation
Getting the PCI Board into operation To start operation of the coM.sat PCI GSM Board first you will have to insert the SIM-cards and connect the antenna. 1. With a pen or a small screwdriver press onto the yellow button to eject the SIM-cardholder. -
Page 9: Technical Data Of The Pci Board
PCI GSM Remark: In case you are in possession of a 2-channel-version of the coM.sat PCI GSM Board you will have to use one of the lower two SIM-card ports „1“ and „2“. Also only one antenna will be necessary and it has to be connected to the connection marked with„...
Need help?
Do you have a question about the PCI-GSM-Board and is the answer not in the manual?
Questions and answers