Display Items; Repeat And Shuffle Play; Playing Back Ipod - Sony MEX-BT3700U Operating Instructions Manual

-
Display items
(~m. ' ~ __. . . . . , . . . . H_'~
• 0
" Source
e
Track name, Artist name, Album number*,
Album name, Track numberlElapsed playing
time, Clock
*
Album number is displayed only when the album is
changed.
To change display items
e,
press
(DSPL).
Notes
• Displayed items will differ, depending on the USB
device, recorded format and settings. For details,
visit the support site.
• The maximum number of displayable data is
as
follows.
- folders (albums): 128
- files (tracks) per folder: 500
• Do not leave
a
USB device in
a
parked car,
as
malfunction may result.
• It may take time for playback to begin, depending on
the amount of recorded data.
• DRM (Digital Rights Management) files may not be
played.
• During playback or fast-forward/reverse of
a
VBR
(Variable Bit Rate) MP3IWMAlAAC file, elapsed
playing time may not display accurately.
• Playback of the following MP3IWMAlAAC files is not
supported.
- lossless compression
- copyright-protected
Repeat and shuffle play
1
During playback, press
®
(REP) or
o
(SHUF) repeatedly until the
desired setting appears.
iPod
For details on the compatibility of your iPod, see
"About iPod" on page 24 or visit the support site.
In these Operating Instructions, "iPod" is used as
a general reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text or illustrations.
Support site
http://esupport.sony.com
http://www.xplodsony.com/
Playing back iPod
Before connecting the iPod, turn down the
volume of the unit.
1
Connect the iPod to the USB terminal
via the dock connector to USB cable.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below. *
After 3 seconds, the setting is complete.
To return to normal play mode, select
"e:
OFF"
or "SHUF OFF."
14
Select
e:
TRACK
e:
ALBUM
SHUF ALBUM
SHUF DEVICE
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
Tip
We recommend the RC-1001P USB cable (not
supplied) to connect the dock connector.
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press
(SOURCE)
repeatedly until
"USB" appears. ("IPD" appears in the display
when iPod is recognized.)
*
If the iPod was played back in the passenger control
last time, this will not appear.
2
Press
(MODE)
to select the play mode.
The mode changes as follows:
RESUMING - ALBUM - TRACK -
PODCAST* - GENRE - PLAYLIST
-ARTIST
*
May not appear depending on iPod setting.