Title Operations; Chapter Operations - Panasonic Diga DMR-EH50 Operating Instructions Manual

Title operations

After performing steps 1–5 ( 38)
§
Erase
[HDD] [RAM] [-R] [-RW‹V›] [+R]
Properties
[HDD] [RAM] [-R] [-RW‹V›] [+R]
[-RW‹VR›]
Enter Name
[HDD] [RAM] [-R] [-RW‹V›] [+R]
§
Set up Protection
§
Cancel Protection
[HDD] [RAM]
Partial Erase
[HDD] [RAM]
( below, For your reference)
Change Thumbnail
[HDD] [RAM] [-R] [-RW‹V›] [+R]
( below, For your reference)
Divide Title
[HDD] [RAM]
( below, For your reference)
§
Multiple editing is possible.

Chapter operations

After performing steps 1–7 ( 38)
§
Erase Chapter
[HDD] [RAM]
Create Chapter
[HDD] [RAM]
( below, For your reference)
Combine Chapters
[HDD] [RAM]
§
Multiple editing is possible.
For your reference
≥Use search (
31), Time Slip (
≥To find the desired point correctly, use Slow-motion (
≥Press [:, 9] to skip to the end of a title.
Press [2, 1] to select "Erase" and press [ENTER].
≥Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
≥The available recording space on DVD-R or +R does not increase when you erase titles.
≥Available recording space on DVD-RW (DVD-Video format) increases only when the last recorded title is
erased. It does not increase if other titles are erased.
Information (e.g., time and date) is shown.
≥Press [ENTER] to exit the screen.
You can give names to recorded titles.
53, Entering text
If set, this will protect the title from accidental erasure.
Press [2, 1] to select "Yes" and press [ENTER].
The lock symbol appears when the title is protected.
You can remove unnecessary part of the recording.
1 Press [ENTER] at the start point and end point of the
section you want to erase.
2 Press [3, 4] to select "Exit" and press [ENTER].
≥Select "Next" and press [ENTER] to erase other sections.
3 Press [2, 1] to select "Erase" and press [ENTER].
You can change an image to be shown as the thumbnail picture in the Title
View.
1 Press [1] (PLAY) to start play.
2 Press [ENTER] when the image you want to use as a
thumbnail is shown.
To change the thumbnail
Restart play and press [3, 4] to select "Change", then press [ENTER]
at the point you want to change.
3 Press [3, 4] to select "Exit" and press [ENTER].
You can divide a title into two.
1 Press [ENTER] at the point you want to divide the title.
2 Press [3, 4] to select "Exit" and press [ENTER].
3 Press [2, 1] to select "Divide" and press [ENTER].
To confirm the division point
Press [3, 4] to select "Preview" and press [ENTER]. (The unit plays 10
seconds before and after the division point.)
To change the division point
Restart play and press [3, 4] to select "Divide", then press [ENTER] at the point where you want to divide
the title.
[Note]
≥The divided titles retain the title name and CPRM property (
≥Video and audio just before and after the dividing point may momentarily cut out.
Press [2, 1] to select "Erase" and press [ENTER].
≥Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
Select the point where you want to start a new chapter while viewing the
title.
1 Press [ENTER] at the point you want to divide.
≥Repeat this step to divide at other points.
2 Press [3, 4] to select "Exit" and press [ENTER].
Press [2, 1] to select "Combine" and press [ENTER].
≥The selected chapter and following chapter are combined.
32) to find the desired point.
31) and Frame-by-frame (
DIRECT NAVIGATOR Partial Erase
HDD
008
ENTER
RETURN
DIRECT NAVIGATOR Change Thumbnail
HDD
008
ENTER
DIRECT NAVIGATOR
HDD
008
68) of the original title.
DIRECT NAVIGATOR
HDD
008
31).
Properties
Dinosaur
No. 026 Time 12:19
Date 11.10.2004 MON Rec time 0:30 (SP)
Name ARD
DIRECT NAVIGATOR TITLE
HDD
007 008
ARD 10.10. FRI ARD 11.10.
VIDEO
PICTURE
PLAY Start
End
Next
Exit
0:43.21
Start End
- -:- -.- - - -:- -.- -
VIDEO PICTURE
;
Change
Exit
0:06.45
Start play and select the image
Change
of a thumbnail.
0:06.45
Divide Title
VIDEO PICTURE
PLAY Preview
Divide
Exit
0:43.21
Divide
- -:- -.- -
Create Chapter
VIDEO PICTURE
PLAY Create
Exit
0:43.21
RQT8027
39