Summary of Contents for AT&T DMOH
- Page 1 Digital Magic On Hold Tape Deck Model DMOH Installation and Operation Instructions Magic On Hold is a Service Mark of AT&T Issue 1, 12/2/91 Printed In U.S.A.
- Page 2 Limited Warranty and Limitation of Liability AT&T warrants to you that the product will be free from defects In material and workmanship when title passes to you. If you notify AT&T that the product has failed to operate as warranted within one year of the date title passes to you, AT&T will, at its option, repair or replace the component or components of the product that failed to operate as warranted.
- Page 3 SHALL AT&T, ITS AFFILIATES, SUPPLIERS AND DEALERS BE LIABLE FOR INCIDENTAL, RELIANCE, CONSEQUENTIAL OR ANY OTHER INDIRECT LOSS OR DAMAGE (INCLUDING LOST PROFITS OR REVENUES SUSTAINED OR INCURRED IN CONNECTION WITH THE SYSTEM). THIS LIMITATION OF LIABILITY SHALL SURVIVE FAILURE OF THE EXCLUSIVE REMEDY SET FORTH IN THE LIMITED WARRANTY ABOVE.
- Page 4 Digital Magic On Hold (SM) Tape Deck Model DMOH Installation and Operation Instructions To Order Copies of This Manual Call: Your AT&T Information Systems Sales Representative Your Business Sales and Service Center 1-800-247-7000 The AT&T Customer Information Center 1-800-432-6600 Write: AT&T Customer Information Center...
-
Page 5: Specifications
FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 6: Table Of Contents
Table of Contents Introduction ................1 Front Panel Features ..............2 Rear Panel Controls and Connectors ...........3 Installation & Operation ............4 DMOH Package Contents..............4 Unpacking and Inspection............4 Installation Precautions ..............4 Installation Procedure..............4 Select Memory Capacity ............4 Connecting a Power Supply ..........5 Connecting to the Telephone System .........5 Connecting an External Speaker ..........5... -
Page 7: Introduction
AT&T DMOH Introduction The AT&T Digital Magic On Hold (DMOH) Tape Deck plays a digitally recorded Magic On Hold announcement over the message-on-hold bus of most telephone systems. To obtain Magic On Hold customized cassette programs call your AT&T account executive or 1-800-247-7000. -
Page 8: Front Panel Features
AT&T DMOH Front Panel Features Cassette Tape Compartment High-quality cassette tape drive mechanism accepts a Magic On Hold cassette tape. Cassette tape direction indicator is shown on the compartment door. LED Indicators For POWER, PLAY, & RECORD. PLAY illuminates only while the digitally stored message is playing. -
Page 9: Rear Panel Controls And Connectors
AT&T DMOH Rear Panel Controls and Connectors POWER Turns power on. The memory is erased when the switch is off. 12V AC/DC Jack accepts 12V AC or DC power to the unit. The power supply provides 12V AC @ 800mA from a 110V AC source. -
Page 10: Installation & Operation
· Unpacking and Inspection The DMOH unit was carefully checked at the factory. Inspect the carton and unit for signs of damage. If damage is found, notify the location from whom the unit was purchased. If the unit was shipped to you directly, notify the transportation company without delay if it is damaged or fails to operate correctly. -
Page 11: Connecting A Power Supply
AT&T DMOH Connecting a Power Supply Connect the output plug from the power supply to the 12V AC/DC jack on the rear panel of the unit. Plug the power supply into any convenient 110V AC outlet. Connecting to the Telephone System Use the audio patch cord terminated with an RCA plug (included) to connect the LINE 600 ohm or 1 WATT output to the telephone system's music-on-hold (MOH) input. - Page 12 MOH volume control, set it to approximately 1/2 output level. Place a call to your telephone from another telephone. · Place the calling telephone on hold. · Adjust DMOH volume control to obtain a comfortable listening level. If level is · not acceptable, adjust telephone system MOH volume.
-
Page 13: Optional External Trigger Operation
AT&T DMOH Optional External Trigger Operation External Trigger Operation is not required for most AT&T MOH Applications The unit can be set for single-play operation, activated by an external trigger. (Note: the PLAY LED on the front panel illuminates only during digital playback.) The TRIG mini-jack on the rear panel accepts a mono or stereo mini-plug, as shown in the illustration below. -
Page 14: Troubleshooting
Cannot remove cassette because head is engaged - Turn power off and then on. Wait for head to retract then remove cassette. Unit does not preview or download cassette - The DMOH is not compatible with CrO2 tapes. You must use a proper AT&T Magic On Hold cassette. -
Page 15: Wiring Connection
AT&T DMOH Wiring Connection Digital Magic On Hold Tape Deck TELEPHONE MUSIC ON HOLD CONNECTION (See OUTPUT SYSTEM Note) MERLIN(R)206,410,82 PAGING CARTRIDGE #6102-MHPA 1 WATT MERLIN 1030/3070 SERVICES MODULE #61320A 1 WATT MERLIN II MUSIC COUPLER #61398A-THROUGH 600 OHM MERLIN LEGEND... - Page 16 MERLIN, PARTNER, & SPIRIT are Registered Trademarks of AT&T MAGIC ON HOLD is a Service Mark of AT&T Note: Connect the Magic On Hold unit to the telephone system per the telephone system installation instructions for Music-On-Hold.
Need help?
Do you have a question about the DMOH and is the answer not in the manual?
Questions and answers