HTC MTC Pulse User Manual page 110

110 Getting Connected
• Wi-Fi networks
On the Wireless & networks screen,
tap Wi-Fi settings, then tap the
wireless network that the phone is
currently connected to.
A message box will be displayed
showing the Wi-Fi network name,
status, speed, signal strength, and
more.
Note If you want to remove the wireless
network settings on your phone, tap
Forget on this window. You need to
enter the settings again if you want to
connect to this wireless network.
To connect to another Wi-Fi network
1. On the Wireless & networks screen, tap Wi-Fi settings. Detected
Wi-Fi networks are displayed in the Wi-Fi networks section.
Tip
2. Tap another Wi-Fi network to connect to it.
Note If the wireless network you want to connect to is not in the list of
To connect to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (.p1) to your
phone before you can connect to a Wi-Fi network with EAP-TLS
authentication protocol.
1. Save the certificate file to the root folder of the storage card.
2. Press HOME
To manually scan for available Wi-Fi networks, on the Wi-Fi settings
screen, press MENU and then tap Scan.
detected networks, scroll down the screen, then tap Add a Wi-Fi
network. Enter the wireless network settings, then tap Save.
> MENU, and then tap Settings > Security.
( )