Download Print this page

Pedal Valves PEDALWORKS PVI-21 Owner's Manual

Faucet controller

Advertisement

Quick Links

3 Year Limited Warranty
Pedal Valve Inc. will repair or replace units with defects
in materials or workmanship for a period of three years
from date of purchase. Return unit to factory at the
address below, freight pre-paid, and your unit will be
repaired and shipped back at no charge.
Problems due to mineral deposits from your water,
or damage to the finish are not covered by this
warranty, but will be repaired at a nominal charge.
You can obtain 2-3/8" compression union from a
hardware store and connect the hoses together if ever
you need to have the unit out for repair.
Include name, daytime phone #, dated proof of
purchase for warranty repairs, and return address
when shipping unit to factory.
For Warranty Service or Repairs, Ship To:
Pedal Valves Inc.
13625 River Road
Luling, LA 70070
Tech Support 985-785-0594
Fax 985-785-0082
E-mail pvi@pedalvalve.com
www.pedalvalve.com
Page 12

Owners Manual

PEDALWORKS
FAUCET
CONTROLLER
Model PVI-21
TM

Advertisement

loading
Need help?

Need help?

Do you have a question about the PEDALWORKS PVI-21 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pedal Valves PEDALWORKS PVI-21

  • Page 1: Owners Manual

    Include name, daytime phone #, dated proof of purchase for warranty repairs, and return address when shipping unit to factory. For Warranty Service or Repairs, Ship To: Pedal Valves Inc. 13625 River Road Luling, LA 70070 Tech Support 985-785-0594 Fax 985-785-0082 E-mail pvi@pedalvalve.com...
  • Page 2 Phone 985-785-9997 Fax 985-785-0082 If not, tighten appropriate cartridge a little further. e-mail; pvi@ pedalvalve.com website; www.pedalvalve.com Other problems may require a plumber for repairs, or contact Pedal Valves Inc. Page 11 Page 2...
  • Page 3: Parts Breakdown

    Parts Breakdown Contents Of Box Installation Tools Needed Ref # Part # Name of Part • Drill with 2” hole saw. A jigsaw or keyhole saw PVI21P11 Cover, White Plastic PVI21P12 Cover, Metal can be used instead, but the 2” hole saw is the PVI21P20 Valve Body easiest.
  • Page 4 More Tips and Benefits Using the template, mark the hole locations for the pedal arm, and the 4 mounting screw anchors. More tips for the kitchen When rinsing vegetables, fish, or meats; step on and off You have the freedom to mount the unit where the pedal instead of leaving the water running.
  • Page 5: Operating Instructions

    Operating Instructions 6. Insert a plastic mounting screw anchor in each of the ¼” holes (4 total). Using your PEDALWORKS Faucet Controller is very 7. Lower PEDALWORKS through hole as shown, simple. We do suggest you read the following tips and and install a mounting screw in each corner.
  • Page 6 10. Connect the stainless steel braided lines as shown. Then, connect these hoses Next make the connections at to the top connections on the supply stops. The hoses The flex lines the back of PEDALWORKS. with 3/8” connectors (the should be hand The hot and cold are smaller size) on both ends are tightened, and then...