1. Getting Start There is no strict requirement which cable should be connected first, it is strongly recommended to connect the power adapter at the last step. 1.1 Back panel 1.2 Back View...
1.3 Remote Control Function Function 1.Press the power button to System settings turn device on or turn into standby mode. 2.Press and hold the power button for 4 seconds to turn the device off. Mute Short cut button to Movies Screen Numeric Buttons Audio tracks button...
2. Package Contents ◆ JUSTOP Smart TV Player ◆ Remote Control ◆ Power adapter ◆ HDMI Cable ◆ AV Cable ◆ Manual 3. Quick Start Guide 3.1 Home Screen Select between: 1. Android tradional Launcher 2. Media centre TVdLauncher Android Launcher Screen: The android launcher screen operating please refer to Google's official Android 4.0 user guide...
Page 7
TVdlauncher Screen: The JUSTOP Smart TV Player provides many applications, some of them already showed on the Quick Access Panel (QAP) in HOME Screen; from left to right are “Applications”, “Settings”, “Favorites”, “File Browser” and “Web browser”. Click each one of icon on QAP to enter the Android applications screen: display all the applications installed...
3.2 Settings Press 'Settings' or quick access button to open system main settings screen Section 1. Wireless &Networks 1) Wi-Fi and Network Settings Wi-Fi: Switch WI-FI to 'ON' position, select your network from the listing on the right hand side Ethernet: if you use RJ45 wired connection, you can access detailed settings from 'More..' section.
*You can enable/disable Ethernet adapter from this screen. Section 2: Device 1. Sound You can adjust the system volume from this page. 2. Display Display settings 3. Storage Storage information for media database.
3.3 File browser Browse any files from internal memory, USB Drive or SD/MMC card attached to the Box. You can also install applications downloaded directly from this screen. (SD Card/USB only appears upon device connected) 3.4 Web Browser Quick access to internet browser 4.
Page 15
Remove Program: 1. click “settings” and enter to “Apps”, it will show up all the installed program list. 2. click “uninstall” icon to remove.
6. Firmware Update New firmware will be released from website: WWW.JUSTOP.COM Download the new firmware pack with your PC, unzip to your local hard drive. The pack includes: upgrading tool, firmware file and update guide Update guide: 1. Open the upgrading tool (PhoenixCard) 2.
3.The firmware files will not show on PC browser, nor the firmware SD card can be formatted by PC disk manager. Use PhoenixCard tool's 'Clear Info' feature to format your SD card back into normal file system. 7. Trouble Shootings Problem Solution Check if the power adapter is properly connected .
Page 19
Check if the input mode for TV and output mode for TV box are the same No sound with HDMI Check your TV system setup connection Check the volume The TV screen is Turn off your player, wait 30 seconds, turn it on again blank and the palyer Set the your TV input to 720P LED is blinking...
Page 20
Q5. What to do when DNS error occurs? Answer: Please check if the IP address, subnet mask, gateway and DNS of the device are setup correctly. Please select “automatically capture of IP address” at Network Settings and make sure that the DNS service of the router is enabled. Please check if the network is working normally.
Need help?
Do you have a question about the Smart TV Player and is the answer not in the manual?
Questions and answers