Eade - JVC KD-ADV6270J Service Manual

C D
Route No.(EJECT route No.)
*Transition in the center loading (Similar to 12cm in the side loading)
"DVD-TEMP" is
indicated on the LCD.
"SYS-TEMP" is
indicated on the LCD.
"CHK MODE" is
indicated on the LCD.
"RUNNING" is
indicated on the LCD.
"MEMCHECK" is
indicated on the LCD.
"INIT" is
indicated on the LCD.
SW1/2/3/4 [Rest SW]
- 1,1,1,1
1(2) 0,1,1,1
1(2) 0,0,1,1
2(2) 0,1,1,1
2(2) 1,1,1,1
3(1) 1,1,1,0
3(1) 1,1,1,0
Chart 1.2 8cm Disc switch status transition
Press the [SEL] key Thermistor's temperature data readout
: Data in the temperature sensor in the DVD unit
is read every 5 seconds and displayed in hex numbers.
Thermistor's temperature data readout
Press the [SEL] key
: Data in the temperature sensor in the system control
is read every 5 seconds and displayed in hex numbers.
Press the [SEL] key
DVD unit check mode
(See section "
Running mode: For use in running tests.
Press the [SEL] key
Press the [SEL] key Memory check
: The remaining data capacity of the disc is displayed on
the LCD.
Press the [SEL] key
Initialize user set data
: The system control EEPROM is initialized except for the
loading/ejection error history.
Loading *
Eject
[0] No Disc No Disc
[0] Disc insert Eject
detection completion
[0]
[0]
[0]
[0]
[1] Load completion Eject start
DVD unit check mode" for details.)
Reload
Disc push in
Reload start
Load completion
(No.MA250)1-29