Setting Of Display Mode - Samsung SDM-160 User Manual

Digital Multiplexer

2. Setting of display mode

You can set LIVE/PB display type, PIP size, sequence, and border color, PB IN, etc..
The following screen is displayed if pressing the "ENTER" button with the blinking position placed at the
"2. MON OUT SET" by pressing "MOVE" button on the main menu.
[MON OUT SET]
LIVE DISPLAY ALL
PB DISPLAY
SPOT OUT...
PB IN
PIP SIZE
BORDER COLOR
SEQUENCE...
LOSS DETECT...
LOSS INFO
ALARM INFO
MOTION INFO
- The blinking indication moves if pressing "
- The setting value is changed if pressing "
LIVE DISPLAY: ALL TITLE
PB DISPLAY : ALL TITLE
¥ ALL: Both date/time and title are displayed.
¥ TITLE: Only channel title is displayed.
¥ DATE/TIME : Only date/time is displayed.
¥ NONE: Both date/time and title are not displayed.
PB IN: CVBS Y/C
¥ Set the replay (P, B mode) input.
¥ Y/C: Input of SUPER VHS
¥ CBVS:COMPOSITE BNC input
¥ SDM-160M/SDM-160MP:Not used.
PIP SIZE: 1/9 1/16
¥ Set the size of the sub-screen in the PIP mode.
BORDER COLOR: WHITE
¥ Set color of the division line of the division screen or the PIP screen.
¥ SDM-160M/SDM-160MP:Not used.
LOSS INFO: ON OFF
¥ Set in order to advise LOSS information to the screen.
ALARM INFO: ON OFF
¥ Set in order to advise ALARM information to the screen.
MOTION INFO: ON OFF
¥ Set in order to advise MOTION information to the screen.
ALL
CVBS
1/9
WHITE
ON
ON
ON
", " " button.
", " " button.
DATE/TIME NONE ALL
DATE/TIME NONE ALL
GRAY
5-3