Table of Contents
Advertisement
TO OPTIMIZE SOUND ND IM GE QU LITY
Digital Terminal Settings
To optimize sound quality for your system, we recommend the following settings:
1. Press SETTINGS twice to call up the General Settings screen.
2. Select Audio: Volume Ctrl, and then Fixed.
3. Program your remote control to handle volume control through your television (see pages 8 to 17).
4. If your system does not use digital audio output (S/PDIF), call up the General Settings screen and select
Audio: Range, then Narrow.
5. If you are using digital audio output (S/PDIF), select Audio: Digital Out, then Dolby Digital.
Connector Cable Quality
• You may require different types of cables to properly connect your digital terminal (RF and RCA, but also S-VIDEO, optical,
S/P DIF and Component cable). Certain basic cables come with your terminal, but if you need to purchase additional
connectors, it is extremely important to buy with quality in mind. Good conductivity and insulation will help you get the
most out of your equipment.
• RF cables vary in quality. Those supplied by Vidéotron meet quality standards for optimal results. If you need to use
additional coaxial cables, avoid the type that does not screw in (push-in cables), as they do not provide a solid
connection and can result in signal loss.
(CONTINUED)
29
Advertisement
Table of Contents
