Security Camera King IPOB-EL1MPIR50 Series User Manual

Cost-effective hd ir waterproof fixed ip camera

Advertisement

Cost-effective HD IR Waterproof Fixed IP Camera User's Manual
Version 1.0.2

Advertisement

Table of Contents
loading

Summary of Contents for Security Camera King IPOB-EL1MPIR50 Series

  • Page 1 Cost-effective HD IR Waterproof Fixed IP Camera User’s Manual Version 1.0.2...
  • Page 2 Welcome Thank you for purchasing our IP camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
  • Page 3: Important Safeguards And Warnings

    Important Safeguards and Warnings 1.Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC in the IEC60950-1.This series product supports PoE too. Please note: Do not connect these two power supplying sources to the device at the same time;...
  • Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
  • Page 5: Table Of Contents

    Table of Contents General Introduction ........................1 Overview ........................1 Features.........................1 Specifications ........................2 Structure ............................4 Multiple-function Combination Cable ................4 Framework and Dimension..................4 Device Installation ........................6 Quick Configuration Tool......................8 Overview ........................8 Operation ........................8 FAQ ............................11 Appendix Toxic or Hazardous Materials or Elements ...............12...
  • Page 6: General Introduction

    1 General Introduction 1.1 Overview This series IP camera integrates the traditional camera and network video technology. It adopts video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series IPC uses standard H.264 video compression technology, which maximally guarantees the video quality.
  • Page 7: Specifications

    1.3 Specifications Please refer to the following sheet for IPC performance specification. Model IPOB-EL1MPIR50 Series Parameter Main Processor TI Davinci high performance DSP Embedded LINUX System Support real-time network, local record, and remote operation at the Resources same time. User Interface...
  • Page 8 1- channel wire Ethernet port, 10/100 Base-T Ethernet Wire Network Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP, Network Protocol SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour, SNMP. Remote Monitor, system setup, file download, log information, maintenance , Operation upgrade and etc Restore Default...
  • Page 9: Structure

    2 Structure 2.1 Multiple-function Combination Cable You can refer to the following figure for multiple-function combination cable information. See Figure Figure 2-1 Please refer to the following sheet for detailed information. Port Name Function Connection Note Ethernet 1.LAN Network port Connect to standard Ethernet cable.
  • Page 10 Figure 2-2 Figure 2-3...
  • Page 11: Device Installation

    3 Device Installation Please follow the steps listed below to install the device. Please refer to Figure 3-1 and Figure 3-2 for reference. Paste the installation map on the surface of the wall or the ceiling. Dig the installation holes according to the installation map. Open the accessories bag and then take the expansion bolt out.
  • Page 12 Figure 3-2...
  • Page 13: Quick Configuration Tool

    4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”...
  • Page 14 Figure 4-2 Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 4-3. Figure 4-3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set.
  • Page 15 Figure 4-4 After you logged in, the configuration tool main interface is shown as below. See Figure 4-5. Figure 4-5 For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.
  • Page 16: Faq

    5 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device or factory default setup. operate properly. The water leakage The unauthorized front or rear cap remove many result in water occurred.
  • Page 17: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component Device Construction ○ ○ ○ ○ ○ ○ Material Wire and Cable ○ ○...

Table of Contents