Operation and operating range
i-see sensor moves 30 degrees from the center in both right and left side.
i-see Sensor turning to the left
i-see Sensor operates as follows in accordance with AREA setting made with the remote controller.
"AUTO" in AREA setting: first turning to the LEFT for adjusting the position then.....
"RIGHT" in AREA setting: first turning to the LEFT for adjusting the position then....
"LEFT" in AREA setting: first turning to the LEFT for adjusting the position then....
The sensor finishes turning to one area to another for 3 seconds and it operates one area for 5 seconds.
9-8. PLASMA (
) OPERATION
(1) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(2) Press PLASMA button to set PLASMA operation.
PLASMA lamp turns ON and plasma electrode unit is energized.
(3) Press PLASMA button again to cancel PLASMA operation.
Description of PLASMA operation:
Plasma operation consists of deodorizing and air purifying features.
Particles of odor-releasing substances are absorbed and decomposed by the plasma deodorizing fi lter.
Particles of allergens such as pollen and house dust are collected by the plasma anti-allergy fi lter.
These fi lters work with negative ions generated by the plasma electrode unit.
i-see Sensor turning to the center
CENTER
RIGHT
(The sensor turns to the right, left and center.)
CENTER
RIGHT
(The sensor turns to the right and center.)
CENTER
LEFT
(The sensor turns to the left and center.)
CENTER
LEFT
CENTER
RIGHT
CENTER
LEFT
17
i-see Sensor turning to the right
CENTER......
CENTER......
CENTER......