Table of Contents
Advertisement
Multiple Print Queues Configuration
To configure the print server to service multiple print queues, please follow the instructions listed
below:
1.
Log into your NetWare file server as a Supervisor (Admin) or equivalent.
2.
Run the PSAdmin from your Windows.
3.
Select the print server and to be configured.
4.
Click the Wizard icon in the tool bar.
5.
Type in a Print server and a Print Queue Name (For more detailed information about
Wizard, please refer to the "Wizard" section in this chapter).
6.
Run the NetWare's PCONSOLE and create additional print queues.
7.
Select the Print server name you specify in Step 5.
8.
Select the "Print server Configuration" option and select the "Queue Serviced by
Printer" option (For NetWare 4.x's PCONSOLE, please select "Printers" option and select
"Printer 0" instead).
9.
Select the "Printer 0" and press the [Insert] key to add the print queues you create in Step
6 into the list (For NetWare 4.x's PCONSOLE, please select "Print queues assigned"
option instead).
10.
Reset the print server by clicking the "Reset" icon from the PSAdmin. Done.
Note: Please refer to NetWare's Print server/Services manuals for detailed PCONSOLE
commands.
24
DG-PS1010U User Manual
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
