Contact Wet Sounds, Inc. either by phone at 877-938-7757 or by email at warranty@wetsounds.com. A service representative will assist you in the necessary actions to verify that the problem that you are experiencing is covered under warranty. If it is in fact a warranty issue, Wet Sounds will issue an RA number for Qts= 0.36...
Page 3
HOLE TEMPLATE ENCLOSURE CONSTRUCTION For best performance the walls of the enclosure should be rigid and not vibrate as a result of the internal pressures XS-XXX generated by the loudspeakers. WET SOUNDS recommends constructing enclosures from medium-density fiberboard (MDF) with a minimum thickness of 3/4”. In larger enclosures over 1 cubic foot, internal bracing that joins opposite walls can be incorporated and the final enclosure should be as rigid as possible.
Page 4
Even though vented enclosures are not air-tight, you should follow the same procedure as with sealed boxes and glue and screw together all joints. Bellow you will find drawings for enclosures specifically designed for Wet Sounds Marine subwoofer .