Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Max Manuals
  4. Cutter
  5. PJRC160
  6. Operating and maintenance manual

Max PJRC160 Operating And Maintenance Manual

Cordless re-bar cutter
Hide thumbs Also See for PJRC160:

Advertisement

Quick Links

PJRC160
CORDLESS RE-BAR CUTTER
AKKU-BEWEHRUNGSSCHNEIDER
COUPE-BARRE D'ARMATURE SANS FIL
TAGLIATONDINI A BATTERIA
CORTADOR DE BARRAS DE ACERO
CORRUGADO INALÁMBRICO
OPERATING AND MAINTENANCE MANUAL
MANUEL D'UTILISATION ET D'ENTRETIEN
MANUALE DI FUNZIONAMENTO E MANUTENZIONE
MANUAL DE FUNCIONAMIENTO Y MANTENIMIENTO
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING
AND INSTRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING
LESEN SIE VOR INBETRIEBNAHME DES GERÄTES DIE GEBRAUCHS- UND SICHER-
HEITSHINWEISE.BITTE BEWAHREN SIE DIE GEBRAUCHS- UND SICHERHEITSHIN-
WEISE AUF, DAMIT SIE AUCH SPÄTER EINGESEHEN WERDEN KÖNNEN.
WARNUNG
AVANT D'UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SÉCURITÉ AFIN DE
GARANTIR UN FONCTIONNEMENT SÛR.
CONSERVER CE MANUEL EN LIEU SÛR AVEC L'OUTIL AFIN DE POUVOIR LE CONSULTER
ULTÉRIEUREMENT.
AVERTISSEMENT
PRIMA DI USARE QUESTA MACCHINA, STUDIARE IL MANUALE PER PRENDERE ATTO DEGLI
AVVERTIMENTI E DELLE ISTRUZIONIPER LA SICUREZZA.
TENERE QUESTE ISTRUZIONI INSIEME ALLO STRUMENTO PER CONSULTAZIONI FUTURE.
ATTENZIONE
ANTES DE UTILIZAR ESTA HERRAMIENTA, LEA DETENIDAMENTE ESTE MANUAL PARA
FAMILIARIZARSE CON LAS ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD.
CONSERVE ESTAS INSTRUCCIONES JUNTO CON LA HERRAMIENTA PARA FUTURAS CONSULTAS.
ADVERTENCIA
BETRIEBSANLEITUNG
Original Language English

Advertisement

loading

Related Manuals for Max PJRC160

Summary of Contents for Max PJRC160

  • Page 1 PJRC160 CORDLESS RE-BAR CUTTER AKKU-BEWEHRUNGSSCHNEIDER COUPE-BARRE D'ARMATURE SANS FIL TAGLIATONDINI A BATTERIA CORTADOR DE BARRAS DE ACERO CORRUGADO INALÁMBRICO OPERATING AND MAINTENANCE MANUAL BETRIEBSANLEITUNG MANUEL D'UTILISATION ET D'ENTRETIEN MANUALE DI FUNZIONAMENTO E MANUTENZIONE MANUAL DE FUNCIONAMIENTO Y MANTENIMIENTO Original Language English BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND INSTRUCTIONS.
  • Page 2 41 to 52 ESPAÑOL Page 53 to 64 EC DECLARATION OF CONFORMITY Page 71 www.max-europe.com DEFINITIONS OF SIGNAL WORDS WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
  • Page 3 Fig.A Abb.A " & Fig.B / Abb.B Fig.C / Abb.C Fig.D / Abb.D Fig.E / Abb.E Fig.F / Abb.F Fig.G / Abb.G Fig.H / Abb.H Fig.I / Abb.I Fig.J / Abb.J...
  • Page 4 Fig.K / Abb.K Fig.L / Abb.L Fig.M / Abb.M Fig.O / Abb.O Fig.P / Abb.P Fig.Q / Abb.Q Fig.R / Abb.R Fig.S / Abb.S Fig.T / Abb.T Fig.U / Abb.U Fig.V / Abb.V Fig.W / Abb.W...

  • Page 5: Table Of Contents

    ENGLISH OPERATING AND MAINTENANCE MANUAL INDEX 1. GENERAL POWER TOOL SAFETY WARNINGS..... 5 2. REBAR CUTTER SAFETY WARNINGS......8 3. TECHNICAL DATA ............10 4. BATTERY INSTRUCTIONS ..........12 5. OPERATING INSTRUCTIONS......... 15 6. MAINTENANCE..............16 7. STORAGE ................ 16 1.
  • Page 6 • Do not abuse the cord. Never use the • Use personal protective equipment. cord for carrying, pulling or unplug- Always wear eye protection. Protective ging the power tool. Keep cord away equipment such as dust mask, non-skid from heat, oil, sharp edges and moving safety shoes, hard hat, or hearing protec- parts.
  • Page 7 Power tools are dangerous in the hands of untrained users. • Maintain power tools. Check for mis- alignment or binding of moving parts, breakage of parts and any other condi- tion that may affect the power tool's operation. If damaged, have the power tool repaired before use.

  • Page 8: Rebar Cutter Safety Warnings

    Operate the tool only when hand-held. 9. USE ONLY THE AUTHORIZED BATTERY PACK Use only MAX JPL925 battery pack. If the tool is connected to a power supply other than the authorized pack, such as a re-chargeable 1. KEEP HANDS AWAY FROM MOVING...
  • Page 9 13 Handle the power cord carefully 17. BATTERY CHARGING PRECAUTION Do not carry the Battery charger by its 1 Use only MAX Battery charger JC928 power cord. Do not use the power cord to and Battery Pack JPL925 disconnect it from a wall socket; this will...

  • Page 10: Technical Data

    SPECIFICATION LABEL SPECIFICATION LABEL VENTILATION WINDOW POWER CORD CE (VDE) POWER PLUG 2. TOOL SPECIFICATIONS <Battery charger> PRODUCT NO. PJRC160 PRODUCT NAME MAX lithium ion battery charger WEIGHT 7.6kg(16.8lbs.)(Battery included) PRODUCT NO. JC928(CE) HEIGHT 228mm (9") AC100-240V 50/60Hz 1.62- INPUT 0.68A WIDTH 100mm (4")
  • Page 11 5°C to 40°C (41°F to 104°F) OPERATING TEMPERATURE -5°C to 40°C (14°F to 104°F) OPERATING HUMIDITY 80% RH or less BATTERY CHARGER: Use only an authorized Battery charger, MAX JC928. 3. TECHNICAL DATA 4 Overvoltage category 1 NOISE PRODUCT Overvoltage category...

  • Page 12: Battery Instructions

    4. BATTERY INSTRUCTIONS them with a soft dry cloth. If the orange light still blinks or there are no foreign objects, there may be a problem with the battery or charger. Return 1. CHARGING to dealer for service. 3 (Fig. G) Charge the Battery pack. (1) Fully insert the Battery into the receptacle on the Charger until it sits securely on the end.
  • Page 13 • The red charging lamp does not flash when the charger plug is inserted into main power The MAX battery pack uses a Li-ion battery, it source outlet (When the Battery pack is not in- may be illegal to dispose of this battery into the serted in the charger.)
  • Page 14 INDICATION OF QUICK CHARGER LAMPS Charger LED lamp Buzzer sound Recharging status The power cord is plugged Red lamp blinks. into the receptacle. The charger is The charger power cord is plugged It blinks every second. powered. into a wall socket. Two short beeps (Pi, pi) The battery pack is mounted.

  • Page 15: Operating Instructions

    5. OPERATING through the rebar. Therefore, release the trigger after cutting the rebar. INSTRUCTIONS 1 Loosen the lock nut with the included 1. HOW TO MOUNT / REMOVE THE wrench. (Fig.A 11) BATTERY PACK 2 Use the adjusting bolt so that the rebar is set at a right angle to the tool.

  • Page 16: Maintenance

    7. STORAGE 5. HOW TO CHANGE THE BLADES Do not store the tool in a cold weather environ- ment. Keep the tool in a warm area. When not in use, the tool should be stored in a CAUTION warm and dry place. Keep out of reach of chil- dren.