Loading And Unloading Cassettes - Yamaha DTR2 Owner's Manual

LOADING AND UNLOADING CASSETTES

Loading a cassette
1 Turn the POWER switch ON.
2 Press the OPEN/CLOSE button
cassette holder.
"OPEN" flashes on the display.
3 Place a DAT cassette in the cassette holder.
to open the
4 Press the OPEN/CLOSE button
Unloading the cassette
1
2 Remove the cassette from the cassette holder.
3 Press the OPEN/CLOSE button
NOTES:
Be sure the window of the cassette faces you and the
slide tab faces you on the right side.
the cassette holder.
Press the OPEN/CLOSE button
cassette holder.
the cassette holder.
The cassette holder will not close completely if the tape
is inserted improperly. In this case, press the OPEN/
CLOSE button to open the cassette holder and
insert again.
If the cassette holder does not close completely, it will
automatically open after about 10 seconds even if the
OPEN/CLOSE button is not pressed.
Do not attempt to open or close the cassette holder by
hand. Doing so will damage it.
again to close
to open the
again to close
15