Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JLab Crasher
Summary of Contents for JLab Crasher
- Page 1 CRASHER BLUETOOTH WIRELESS STEREO SPEAKER INSTRUCTION MANUAL...
- Page 2 INTRODUCTION Thank you for purchasing the Crasher. We are excited to welcome you to the JLab community. As an owner of the Crasher portable Bluetooth speaker, we are here to help assist you with any product questions or issues that come your way.
-
Page 3: Overview
Another way to check if fully charged, is to click the Battery Check button once (see item 2 above). If all 4 LED indicators light up, your Crasher is almost or fully charged. If only 1 – 3 of the LED lights light up, please continue charging your device. - Page 4 Connect the speaker with almost any audio device directly by using the supplied 3.5mm cable. Connect one end of the 3.5mm cable to the audio in port on the Crasher (see item 5 above) and the other end of the cable to the 3.5mm audio port on your favorite devices.
- Page 5 - Ensure your Bluetooth device is on and connected. - Move your Bluetooth device closer to the Crasher - Turn off your Bluetooth device and the Crasher then power them both back on Volume - Turn up the volume on your portable device and/or the Crasher.
- Page 6 Changes or modifications made to the Crasher without approval by JLab could void the user’s authority to operate the equipment. The Crasher complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Crasher and is the answer not in the manual?
Questions and answers