Resetting The Air Purifier - Hunter PermaLife 30547 Owner's Manual

Resetting the Air Purifier

In the unusual situation that the unit or the display is exhibiting erratic behavior, you may
want to reset the air purifier. Since you will lose all of your programmed settings when the
unit is reset, you should consult the Troubleshooting section (pg. 23) of the manual to re-
solve the problem before using the Reset Feature. When the unit is reset, the clock, day of
the week, and programs will default to their factory settings and the unit will turn off. The
only information that will be saved is the pre-filter and filter counter values. If you still
have problems after resetting the air purifier, please contact Hunter for additional assistance
(refer to Technical Assistance pg. 23).
To Reset the Air Purifier:
1. Using a small pin or paperclip, hold down the RESET key for 2 seconds or until
RESET
the display goes blank.
2. Follow the directions in the Programming section of the manual (pg. 14) to up-
date the day, time, and programs of the unit.
41959-01_3.30.06.pmd
19
19
Programming
3/30/06, 3:15 PM
41959-01