Gigabyte GA-K8NF9-SI User Manual page 20

8) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will
blink when the system enters suspend mode.
9) F_PANEL (Front Panel Jumper)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
SPEAK (Speaker Connector)
(Amber)
PW (Power Switch)
(Red)
MSG (Message LED/Power/Sleep LED)
(Yellow)
RES (Reset Switch)
(Green)
HD (IDE Hard Disk Active LED)
(Blue)
NC (Purple)
GA-K8NF9-SI Motherboard
1
SPEAK-
Speaker Connector
SPEAK+
PW-
Power Switch
PW+
MSG-
Message LED/
MSG+
Power/
Sleep LED
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 20 -
Pin No. Definition
1 MPD+
2 MPD-
3 MPD-
19
20
NC
RES+
Reset Switch
RES-
HD-
IDE Hard Disk
HD+
Active LED
2 1