Wall Mounting Your Antenna; Warranty & Service - Philips SDV4401/27 Manual

4 W all mounting your antenna
Attach mounting clamps behind wall brackets,
1
and thru reinforcing plates, with bolts facing
out. Do not tighten.
Secure the assembled wall mount to wall
2
with lag screws making sure brackets are
approximately 2 ft. apart and vertically aligned.
Insert mast (not included) and assembled
3
antenna through both mounts, checking
to see that the mast is aligned vertically
(straight). Tighten hex-nuts securely.
To prevent the mast from turning, drill a
4
13/64" hole in mast through the pilot hole of
one of the mounting clamps. Insert 3/4" self-
tapping screw and tighten.
8
7
Mounting clamps
Wall brackets
Reinforcing plates
Hex nuts
2" lag screws
Pilot Hole
3/4" tap screw
5 Warranty & Service
Limited One-Year Warranty
Philips warrants that this product shall be free
from defects in material, workmanship and
assembly, under normal use, in accordance with
the specifications and warnings, for one year
from the date of your purchase of this product.
This warranty extends only to the original
purchaser of the product, and is not transferable.
To exercise your rights under this warranty, you
must provide proof of purchase in the form of
an original sales receipt that shows the product
name and the date of purchase. For customer
support or to obtain warranty service, please
call 919-573-7854. THERE ARE NO OTHER
EXPRESS OR IMPLIED WARRANTIES. Philips'
liability is limited to repair or, at its sole option,
replacement of the product. Incidental, special
and consequential damages are disclaimed
7
where permitted by law. This warranty gives
you specific legal rights. You may also have other
rights that vary from state to state.
For technical support, send us an email with the
model number of the product and a detailed
description of your problem to:
accessorysupport@philips.com