DMGT SV8100 User Manual

SV8100 Telephone User Guide

ANSWERING CALLS

1) Line keys will illuminate steady, Main I/C key will ring
2) Lift handset or press speaker key (microphone must be on)
3) Converse

PLACING CALLS - Internal

1) Lift handset or press speaker key, dial intercom extension number
VOICE ANNOUNC CALLS
1) Make sure microphone is turned on
2) Dial extension, when you hear ringback tone press Voice soft-key
3) You are now speaking to called party through their hands free speaker
4) Called party responds hands free or picks up handset and converses

PLACING CALLS - External

1) Lift handset or press speaker
2) Dial 9 + the telephone number (either 7-digits for local calls or 1 + 10-digit number)
3) Converse

CALL ALERT NOTIFICATION (If assigned)

With a call in progress...
1) Recieve a Call Alert Notification in your handset
2) Press HOLD key, then converse with second party
3) Press flashing line key or conference key to return to original call

CO/PBX NUMBER REDIAL

1) Press the REDIAL key up to six (6) times to see the last six (6) external numbers you've dialed.
2) When you locate the number you wish to redial, either lift the handset OR press Speaker to dial.
3) Converse

MICROPHONE CONTROL

1) Press the MICROPHONE (MIC) key.
2) A lit (red) MIC LED indicates that the MICROPHONE is ON. (NO RED LIGHT means the MICROPHONE is
OFF)

SPEAKER PHONE CALLS

1) Press the SPEAKER key, the LED will light red
2) Ensure that the MICROPHONE (MIC) LED is lit
3) Place INTERNAL or EXTERNAL (outside) call
4) Converse
5) Press the SPEAKER key to disconnect call

GROUP LISTENING

With a call in progress via the handset...
1) Press the SPEAKER key, the LED will light
2) Converse. Conversation is heard over the speaker AND the handset. (Use the handset to respond)
3) Press the SPEAKER key to CANCEL GROUP LISTENING.
Page 1