Download Print this page
   

Advertisement

Haier Vacuum Cleaner Instruction manual

Parts Identification

QINGDAO HAIER WHOLE SET SERVICE CO. LTD.
HAIER INDUSTRY PARK,HI-TECH ZONE,QINGDAO
How to use the appliance
ZW-263
Fitting the Flexible Hose
1.Push the flexible hose connector into the hose inlet socket until
it latches into place, then turn clockwise.
2.To release the flexible hose connector, turn anticlockwise then
pull it out of the hose inlet socket.
Pipe connected with the extension tube
Connection, the extension tube of smaller diameter pipe on the
receiving end, Then forced to rotate opposite to connect firmly
.

Advertisement

   Summary of Contents for Haier ZW-263

  • Page 1: Parts Identification

    Haier Vacuum Cleaner Instruction manual ZW-263 Parts Identification QINGDAO HAIER WHOLE SET SERVICE CO. LTD. HAIER INDUSTRY PARK,HI-TECH ZONE,QINGDAO How to use the appliance Fitting the Flexible Hose 1.Push the flexible hose connector into the hose inlet socket until it latches into place, then turn clockwise.

  • Page 2

    Telescopic tube connect with the brush Connection will be to insert a flexible tube brush tube end of larger diameter within Then forced to rotate opposite to connect firmly. Pull out the power cord Pull out the power cord 1. Pull out the power cord up to the yellow marker length, prohibited more than the red mark.

  • Page 3

    1. Storage Place the brush on the vacuum cleaner body of the hook into the slot. 2. using Please disconnect the brush from the slot. Note: move vacuum cleaner when brush brush in in in in slot slot Note: Note: Note: Do Do not not move...

  • Page 4

    Carpet cleaning When you're vacuuming the carpet to remove microfiber Floor cleaning Do not need to rub dirt on the floor, can be removed microfiber Hose blockage If foreign body stuck in the hose, you can disconnect the hose, Front-end and place the vacuum cleaner pipe inlet, for the management of air circulation to foreign body aspiration Clean...

  • Page 5

    Garbage collection 1. Press the front cover locking block, open the front cover. 2. Pull up and down the dust cup and gently shake. And then out slowly out, careful not to spill the dust. 3. Release dust cup lock tabs open dust cup, empty the garbage.

  • Page 6

    Cleaning filter components Open the dust lid, unscrew Haipa cover, remove the HEPA, Then were placed in clean tap water, removed after the dry watershed. Notes All content of this project are related to safety, please be sure to comply with the user; Note this project as long as the right to use this product, Note explains the dangerous extent of the damage size and possible accidents.

  • Page 7

    Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Comments to this Manuals

Symbols: 0
Latest comments: