Summary of Contents for Harbor Freight Tools 96822
Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353.
To protect against electrical shock do not immerse cord, plugs, or the main unit in water or other liquid. Only the non-electrical parts of the unit may be immersed for cleaning. Thoroughly clean and dry these parts prior to first use and before every subsequent use. SKU 96822 For technical questions, please call 1-800-444-3353. Page 2...
Do not use appliance for other than intended use. Maintain labels and nameplates on the appliance. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. This product is not a toy. Keep it out of reach of children.
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
1.2mm (just under 1/16”) back from the bottom blade. If blade alignment is incorrect: add a few drops of oil to the blades, turn the Clipper on for a few moments, then turn off and unplug. SKU 96822 For technical questions, please call 1-800-444-3353. Page ...
Page 6
Loosen screws slightly and readjust. Tighten screws after blade is aligned. SKU 96822 For technical questions, please call 1-800-444-3353. Page 6...
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 96822 For technical questions, please call 1-800-444-3353. Page 8...