The Installation Procedure; Figure 4-2: Setup Wizard's License Agreement; Figure 4-3: Setup Wizard's Network Mode Screen - Linksys WPC55AG User Manual

Dual-Band Wireless A+G Notebook Adapter

The Installation Procedure

1. To install the Adapter, click the Install button on the Welcome screen.
2. After reading the License Agreement, click the Next button if you agree, or click the Cancel button to end the
installation.
3. The Setup Wizard will ask you to choose a network mode. Click the 5GHz + 2.4GHz radio button if you will
connect to both 802.11a and 802.11g networks. Click the 5GHz radio button if you will connect only to
802.11a networks. Click the 2.4GHz radio button if you will connect only to 802.11g or 802.11b networks.
Click the Next button.
Chapter 4: Software Installation and Configuration
The Installation Procedure

Figure 4-2: Setup Wizard's License Agreement

Figure 4-3: Setup Wizard's Network Mode Screen

8