Entek IRD Enshare Datastream MP2 User Manual page 13

4. Choose an Enshare user on the left, then enter the associated MP2 user on the right.
Choose Set to add the users to the list. You can alphabetically sort either side of the list
by clicking the column name. Choose OK when the list is complete.
5. In the New MP2 Gateway dialog box, enter a Name for the gateway. This name
appears in the Currently defined gateways list. You may want to put "Location" or
"Equipment" in the name, depending on the gateway type you want to set up.
Enter the MP2 Database information, including User name and Password.
The MP2 Database information is filled in from the MP2.INI file, except for
Password. Enter the password for the MP2 database. You should not need to re-enter
this information, if your MP2 settings never change. This information is obtained from
a configuration file (MP2.INI) on your computer.
Setting Up MP2 Enterprise Gateways
Enshare Datastream MP2 Gateway User's Guide
Filling in a default site speeds
up asset linking by filling in
the Site field automatically
when linking. See "Linking
Assets to MP2 Enterprise" on
page 6.
These values are obtained
from your MP2.INI
configuration file.
5