RainMaster PRO MAX Quick Reference Manual

QUICK REFERENCE GUIDE FOR PRO MAX REMOTE CONTROL
The examples below demonstrate the remotes basic functionality. For a full explanation of all the features and programming capabilities, refer to the Pro Max User Manual.
A. KEYSTROKE OPERATION
1) Basic Operation
A U T O
U P
a. Increment to next station
b. Decrement to next station
A U T O
D O W N
c. Turn on Station 12
1 2
d. Turn off Station 12 1 2
MV
e. Turn on Master Valve/Pump
PUMP
MV
f. Turn off Master Valve/Pump
PUMP
Note: Any prior operating station will turn OFF when as Auto-Up, Auto-Down, Station On, Station
Off key is pressed.
2) Timed Station Operation (Minutes) *
1
a. Turn On Station 1 for 5 minutes
b. Increment to Next Station and Re-start Timer
c. Decrement to Next Station and Re-start Timer
* When this function is used with the Rain Master RME Sentar I or II, RME Hawk, RME Eagle or Evolution DX2
Controllers, the controller will automatically turn ON the appropriate Master Valve or Pump.
3) Multiple Stations On (Add Stations)
1
a. Turn on Multiple Stations 1, 2, 6,
b. Turn Station 6 OFF (Station 1, 2 remain)
O N
O F F
O N
O F F
MINUTES
O N 5
A U T O
U P
A U T O
D O W N
ADD ADD ADD
2 6
STATIONS STATIONS STATIONS
6
O F F
O F F
c. Turn All Stations OFF
d. Turn All Stations OFF and Increment the stations selected from last station
4) Program Operation (Program) **
a. Turn Program 5 On PROGRAM
b. Increment to Next Station in Program
c. Turn Program 5 Off
O F F
** This function only works with the following Rain Master controllers: RME Sentar I and II, RME Hawk, RME
Eagle, Evolution DX2 controllers. Only one program can be operated at a time.
B.
DESCRIPTION OF FUNCTIONS
1) Add Stations – On Key
Pressing the ON key during multiple station operation will turn off all stations except the one corresponding to
the current number. The remote will resume standard remote operation executing only one station at a time.
2) Add Stations – Auto Up and Auto Down Keys
Pressing AUTO UP or AUTO DOWN during multiple station operation will advance the previously entered
number station accordingly and turn off all other stations. The remote will resume standard remote operations
executing only one station at a time.
3) Add Stations - Off Key
If the OFF key is pressed during multiple station operations, all stations will be turned off.
If the OFF key is preceded by digits, then only the entered station number will be turned off.
4) Program Function
The Program feature is designed to be used only with the following Rain Master products:
RME Sentar
RME Eagle
Evolution DX2 Controllers
The Program feature allows any program currently in the controller to be turned either on or off. This allows
special programs to be executed for testing, evaluation, and supplemental irrigation cycles.
A U T O
U P
O N
5
A U T O
U P