• Connect the equipment to an outlet different from that which the receiver is connected. • Consult your MYE dealer or experienced Radio / TV technician INDUSTRY CANADA COMPLIANCE STATEMENT (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
REAR FLANGE CABLE BLOCKS CABLE EXIT HOLES MOUNTING BASE USE only MYE Entertainment cables with all MYE Entertainment receiver controllers. MYE Entertainment will not be responsible for damage to controllers or cardio equipment when alternate cables or power adapters are used.
MYE Entertainment Digital TV Controller with FM Option Model MTVC2-FM MTVC2-FM KEY IDENTIFICATION FM RADIO SELECT POWER ON/OFF TV Select (FM Preset Select in FM only Mode) VOLUME UP CHANNEL UP SCAN CLOSED CAPTION / MUTE PREVIOUS CHANNEL VOLUME DOWN...
DISPLAY ICON IDENTIFICATION CURRENT FM MUTE “ON” FAULTY PRESET FREQUENCY HEADPHONE CHANNEL JACK FREQUENCY TV MODE FM MODE VOLUME LEVEL INDICATOR EQ PRESETS Special Features: • AUTO OFF Sensor • Channel Default • Auto Default – Private Network Channel Default •...
Channel Default This feature allows the LCD TV to default to a preset TV channel when turned ON. When a default channel has been programmed into the controller the TV will turn on but change to a predetermined channel during which time it will lock out the user key pad functions for 10 seconds.
Disable Auto Default To disable Auto Default (only): 1. Press the “1 & 3” keys simultaneously for 3-4 seconds. The word “Off” will flash in the display. 2. Press the “2” key to enter Auto Default set up mode. 3. Select “0” as the desired TV Default Channel. 4.
SET as a TV CONTROLLER (only) (FM RADIO Disabled) 1. Start with unit OFF. Press and hold the “0” button. 2. Press power ON button. a. The FM arrow icon (only) is displayed when FM Radio “disable” has been selected. When the FM Radio mode has been disabled, the FM icon is no longer visible during normal operation.
Atta ching the Controller USE only MYE Entertainment cables with all MYE Entertainment receiver controllers. MYE Entertainment will not be responsible for damage to controllers or cardio equipment when alternate cables or power adapters are used. Wrap the Secure Grip Band around the intended Install the Mounting Base over the nylon tie mounting pole and cut to fit.
Page 10
USE only MYE Entertainment cables with all MYE Entertainment receiver controllers. MYE Entertainment will not be responsible for damage to controllers or cardio equipment when alternate or other cables are used.
1. Loosen the two screws evenly on the bottom of the IntelliJack module and remove. 2. Carefully insert new IntelliJack module without bending contact pins. 3. Reset the Icon. Turn MYE Controller OFF then press and hold the “Power” button for 3-4 seconds. When the icon appears again release the Power button.
FOLLOWING WARRANTY TERMS AND CONDITIONS. LIMITED WARRANTY MYE ENTERTAINMENT (MYE) WARRANTS ALL NEW MYE PRODUCTS TO BE FREE FROM DEFECTS IN MATERIALS AND MANUFACTURERS FOR THE WARRANTY PERIODS SET FORTH BELOW. THE WARRANTY PERIODS COMMENCE ON THE INVOICE DATE OF THE ORIGINAL PURCHASE. THIS WARRANTY APPLIES ONLY AGAINST DEFECTS DISCOVERED WITHIN THE WARRANTY PERIOD AND EXTENDS ONLY TO THE ORIGINAL PURCHASER OF THE PRODUCT.
Page 13
THOSE WARRANTIES THEREAFTER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. MYE ENTERTAINMENT ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES, EXPRESS OR IMPLIED, ARISING BY LAW...
Need help?
Do you have a question about the MTVC2-FM and is the answer not in the manual?
Questions and answers