Download Print this page

Array electronic AG310 Series User Manual

Ag310 series

Download this manual

Users Manual for Battery Charger

This battery charger is especially made for Tour Guide System

AG310 Series manufactured by Array CO. Ltd, in which there are 24

charging slots are designed especially for Ni-MH or Ni-Cd batteries

charging.

Ⅰ . Product Model: AG310-C.

Ⅱ . Cautions

Please never use batteries which are not Ni-MH and Ni-Cd

Batteries for charging, or it will probably cause the batteries to

leak or even explode.

Please make sure that the Transmitter/ Receiver is turned OFF

before charging.

Please keep the charging case open while charging; it will stop

charging automatically when the case is closed.

Please do not charge repeatedly after the batteries are fully

charged.

Please do not interrupt while charging, or it will affect the

charging result.

Please do not charge when the ambient temperature is above

40 ℃ .

When using the cigarette lighter of an automobile as power

supply for charging, the engine of automobile must keep

running.

Please remove the batteries when the Transmitter/ Receiver is

not used for an extended time.

Need help?

Do you have a question about the AG310 Series and is the answer not in the manual?

Page 1 Users Manual for Battery Charger This battery charger is especially made for Tour Guide System AG310 Series manufactured by Array CO. Ltd, in which there are 24 charging slots are designed especially for Ni-MH or Ni-Cd batteries charging. Ⅰ . Product Model: AG310-C.
Page 2 The fully-charged batteries must be recharged after they haven’t been used for more than 4 months. Ⅲ . Name of Each Part 1. Body of Charger 2. Micro switch 3. Micro switch preventor 4. Power input outlet of the charger 5.
Page 3 As shown in Fig. ② , plug one end of the adapter into the power input outlet. Then power on the other end of the adapter as shown in Fig. ① . If charge in automobile, please plug end A of cigarette lighter cable into cigarette lighter holder, then plug end B into the outlet of charger.
Page 4 Ⅵ . Elimination of Common Faults ITEM FAULT POSSIBLE SOLVING METHODS REASON Make sure that the transmitter or receiver is inserted ﬁ rmly; The charging The LED Check if reverse circuit doesn’t work battery’s electrode is inserted; isn't closed Clean the contact piece of the charging electrodes.

Ag310-c