Subscribe to Our Youtube Channel
Related Manuals for Soulution 560
Summary of Contents for Soulution 560
- Page 1 Series 5 soulution nature of sound 560 D/A- - - - Converter 560 D/A Converter 560 D/A 560 D/A Converter Converter User manual User manual User manual User manual...
- Page 3 Dear client Dear client We are proud that you decided yourself for a soulution product. You have acquired a product with outstanding sonic performance which you will enjoy for many years. We understand your eagerness to get started but even though please study this manual step by step before you integrate the 560 D/A-Converter in your High Fideli- ty system.
- Page 4 CE- - - - Declaration of Conformity Declaration of Conformity Declaration of Conformity Declaration of Conformity Spemot AG declares that this product is in conformance with the following direc- tives and standards: Low Voltage Directive 2006/95/EG (EN/IEC 60065:2002)
-
Page 5: Table Of Contents
Default values for all functions are programmed. Programm Programming Programm Programm No additional settings are required. Switch on the 560 D/A-Converter Select moderate volume at the (pre)amplifier of the 560 Swit Switch on ch on Swit Swit ch on ch on Switch on the source components and your amplifier Check the cabling before you switch on. -
Page 6: Highlights
DAC chips in voltages before they get filtered in the following stage. This ensures optimal conditions in the filter stage as well as for the I-V converters. The soulution 560 D/A-Converter incorporates the unique and innovative, DSP based Zero-Phase-Technology. Every digital to analog converter requires an analog low pass filter in its output in order to suppress high frequency noise and aliasing signals, which adds phase shifts for higher frequencies. - Page 7 Power Supply Power Supply The 560 D/A-Converter has two strictly separated power supply units which are combined with a multistage filtering network for lowest mutual interferences. The supply voltages for the analog section are stabilised in several stages for mini- mal deviations.
-
Page 8: Safety Advice
Service the mains-cable or the mains connectors are damaged foreign substances or liquidity have entered the 560 the 560 has seen rain the 560 seems to malfunction the 560 has fallen to the floor or the housing is damaged Seite... -
Page 9: Scope Of Delivery
Mains (A) Mains (A) Mains (A) Connect the 560 D/A-Converter with the mains supply. In standby the 560 has a power consumption of <0.5W (red LEDs in display). Only switch-off the mains if your 560 D/A-Converter is in standby. LINK (B) - Page 10 LAN (E) LAN (E) LAN (E) LAN (E) The 560 D/A-Converter can receive digital audio data from your local area network. It will be seen by media servers as „UPnP AV/DLNA Media Renderer device. Following file formats are supported: File...
- Page 11 The 560 D/A-Converter supports USB Audio Class 2.0. For operating systems such as Mac OS X, the 560 supports driver free playback up to 24bits/192kHz. Under Windows a specific USB Audio Class 2.0 driver is required for playback of files with sampling rates >...
- Page 12 Display OFF condition Display during start-up Display in operation We suggest switching the 560 D/A-Converter to standby (OFF) while not listening to music. (Power consumption <0.5 W). Unplug the 560 D/A-Converter from the mains before you manipulate with cables, before cleaning, during thunder storms or before you leave for longer periods.
- Page 13 Converter User manual Prog (K) Prog (K) Prog (K) Prog (K) The 560 D/A-Converter can be adjusted to specific requirements of your system. The Prog-button (de)activates the Programming-Mode. Volume (L) Volume (L) Volume (L) Volume (L) The Volume knob controls the functions Volume +/-, Input-Select and is used for the Programming.
-
Page 14: Program-Mode
General General General General The 560 D/A-Converter can be adjusted to your individual setup. It is already pro- grammed with default settings. Further programming is not mandatory. We recommend to adjust the Start-Volume and to set the Max-Volume. Function Function... - Page 15 3 = high 3 = high 3 = high 3 = high 1 1 1 1 , 2 Defines the IR identification of the 560. The remote control has to be adjusted accordingly Loads the default values (bold) (bold) for all...
-
Page 16: Remote Control
2 2 2 2 Remote control Remote control Remote control Remote control Taste Taste Pre/DAC /DAC- - - - Mod Mode e e e CD- - - - Mod Mode e e e Taste Taste /DAC... -
Page 17: Trouble Shooting
If the current at the output is higher than 0.2 A the MUTE OVERCURRENT OVERCURRENT OVERCURRENT OVERCURRENT function is activated and the display shows OVERCURRENT. If you cannot identify the error please disconnect the 560 D/A-Converter from the mains supply and contact your soulution dealer. 4 4 4 4 Service Service Service Service If your soulution product needs service please contact your soulution dealer. -
Page 18: Safety Functions
Transport damages are not subject to this guarantee, repairs will be charged. We recommend effecting transport insurance. If you do not posses the original packaging no more please contact your soulution dealer. Basic repairs may be completed by your soulution dealer. Please clarify whether he is able to do the work before you send the product back to us. -
Page 19: Specification
D/A- - - - Converter Converter Converter Converter User manual 7 7 7 7 Spec Specif if if ification ication Spec Spec ication ication Nominal voltage Nominal voltage Nominal voltage Nominal voltage Model 220 – 240 V / 50 – 60 Hz 220 –... -
Page 20: Dimensions
8 8 8 8 Dimension Dimensions s s s Dimension Dimension Seite... - Page 22 Spemot AG Industriestrasse 70 CH-4657 Dulliken www.soulution-audio.com info@soulution-audio.com soulution nature of sound part.no. part.no. part.no. part.no. 92184 92184 92184 92184...
Need help?
Do you have a question about the 560 and is the answer not in the manual?
Questions and answers