FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
GNC-0101T 32bit 10/100/1000Mbps Gigabit Ethernet adapter for 32-bit PCI Bus- equipped personal computers. The LeveOne GNC-0101T 32bit 10/100/1000Mbps Gigabit Ethernet adapter is ideal for speeding up data transfers for network servers and other computers, such as those used for video-conferencing, that send and/or receive large amounts of data.
802.3x Full duplex flow control, including automatic transmission of Pause frames based on Rx FIFO thresholds 802.1D and 802.1Q priority queuing support. Supports multiple priority queues in both transmit and receive directions. Six LED indicators for easy diagnostic Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full duplex, and management objects,...
data-intensive applications. Likewise, since data transfers occur 10 times faster than Fast Ethernet, servers outfitted with Gigabit Ethernet NIC’s are able to perform 10 times the number of operations in the same amount of time. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks.
NPACKING AND NSTALLATION This chapter provides unpacking and installation information for the LeveOne GNC-0101T 32bit 10/100/1000Mbps Gigabit Ethernet adapter. Unpacking LeveOne GNC-0101T 32bit CAUTION: Under ordinary circumstances, the 10/100/1000Mbps Gigabit Ethernet adapter will not be affected by static charge as may be received through your body during handling of the unit.
Four pair of Cat.5 UTP or STP cable with RJ-45 connector is required for the LeveOne GNC-0101T 32bit 10/100/1000Mbps Gigabit Ethernet adapter. You can use standard or crossover cable to connect the switch MDI-X or MDI-II port, because the LeveOne GNC-0101T 32bit 10/100/1000Mbps Gigabit Ethernet adapter will adjust the...
Software Installation Before connect LeveOne GNC-0101T 32bit 10/100/1000Mbps Gigabit Ethernet adapter to the network, you have to install the network driver first. The driver for each networking operating system is under a separate directory. A HELP.EXE file under root directory lists the information and detailed installation procedure of all the available drivers.
LED I NDICATORS 1000Mbps Gigabit Ethernet Link (1000) This indicator lights green when the Gigabit Card is connects to 1000Mbps Gigabit Ethernet Network. 100Mbps Fast Ethernet Link (100) This indicator lights green when the Gigabit Card is connects to 100Mbps Fast Ethernet Network. 10Mbps Fast Ethernet Link (10) This indicator lights green when the Gigabit Card is connects to 10Mbps Ethernet Network.
Need help?
Do you have a question about the GNC-0101T and is the answer not in the manual?
Questions and answers