3. Install the battery holding plate by installing
the bolts, and then hook the band to secure
the owner's tool kit.
4. Install the seat. (See page 4-11.)
EBUM0183
Replacing the fuse
The fuse holder is located beside the battery and
can be accessed as follows:
1. Remove the seat. (See page 4-11.)
2. Unhook the band securing the owner's tool kit,
and then remove the battery holding plate by
removing the bolts.
1. Battery holding plate
2. Bolt
1. Fuse
2. Spare fuse
1
If the fuse is blown, replace it as follows.
2
1. Turn the key to "OFF" and turn off all electrical
ECB00640
NOTICE
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2. Remove the blown fuse, and then install a
8-38
2
circuits.
new fuse of the specified amperage.
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
1
8