Specifications - Holaday Industries 491198-48 Series User Manual

Fast Charger Manual
3.0

SPECIFICATIONS

Power:
Main: IEC filtered AC power input module
110 - 240 Vac
500 mA MAX.
50 - 100 Hz
Alternate: Automobile cigarette lighter to 2mm
power plug adapter cord.
12.5 Vdc
100 mA
Fuses:
250 Volt, 1.0 Amp, Type T (5 mm x 20 mm)
Output:
Output Open Circuit Voltage:
Fast Charge Pending Current:
Fast Charge Current:
Pulsed Trickle Charge Current:
Output Voltage (During Fast Charge): 4 - 8 Vdc
NiMH Battery:
4.8 Volt 4 Cell NiMH Battery, 25 mAH (Rapid charge
cells, 1.2 volts/cell); Holaday Part #491193
Environmental:
Operating temperature 10 to 40° C
Humidity: 5% to 95% relative humidity, non-
condensing
Power Cable:
This charger is shipped with a three-wire power cable.
When this cable is connected to an appropriate AC
power source, it connects the chassis to earth ground.
The type of power cable shipped with each battery
charger depends on the country of destination.
Page -- 5
12 Vdc
2.0 mA
25 mA
2.0 mA