Thomson Tg185N Web Interface - THOMSON TG185n Setup And User Manual

6 THOMSON TG185n Basics
6.2

THOMSON TG185n Web Interface

Introduction
The THOMSON TG185n Web Interface
browser.
Requirements
Javascript must be enabled on your browser. For more information, consult the help of your Internet
browser.
The IP address of your computer must be between 192.168.1.14 and 192.168.1.63 (for example
192.168.1.20). The subnet mask must be 255.255.255.0. For more information, see
IP to Your Computer" on page
Accessing the THOMSON TG185n Web Interface
Proceed as follows:
1 Open your web browser.
2 If your THOMSON TG185n is switched to:
Access Point mode, browse to http://192.168.1.11.
Wireless Client mode, browse to http://192.168.1.12.
Repeater mode, browse to http://192.168.1.13.
If you have changed the IP address of your THOMSON TG185n during installation, use this IP
address to access the
3 The THOMSON TG185n Web Interface
4 You can now browse through all configurable items of the THOMSON TG185n using the menu on the left.
If you have protected your THOMSON TG185n with a password, the THOMSON TG185n will prompt you
to enter your password. Enter your password and click Log on.
40
allows you to configure your THOMSON TG185n using your web
44.
THOMSON TG185n Web
appears.
"7.1 Assigning a Static
Interface.
E-DOC-CTC-20080624-0009 v2.0