Operating Characteristics - Telecast DiamondBack 2 Instruction Manual

8-channel video multiplexer
Table of Contents

Advertisement

Operating Characteristics

Optical
Wavelength:
Fiber:
Optical Data Rate: 2.488 Gb/sec
Optical Source
Link margin:
Distance
@1310nm
@1550nm
@1550nm DFB
Video and Data
NTSC,PAL and SECAM signals at any of the 8 signal channels. Adder data at
th
The 9
port. (Adder 161 and 882i ONLY)
Interface
Input/Output Impedance
Video Signal to Noise Ratio
Frequency Response
(5 Hz to 6 MHz)
Differential Gain
Differential Phase
Chrom-Lum Delay
Power Requirements
Voltage:
12 to 24 VDC
Current:
< 1.5 Amp
Power:
< 20 watts
NOTE: Although the units will operate at 12 VDC, 13.8 VDC is required to charge
the internal UPS battery. Absolute maximum voltage is 30 VDC.
Equipment damage may occur at higher voltages.
Mechanical/Environmental
Dimensions (L x W x H)
Weight, each unit
Connectors
Electrical
Optical
Temperature Range
Humidity Range
1300 nm (standard), 1550 nm (optional),1550 nm dFB
(optional) or CWDM wavelengths (optional) designated at
time of purchase.
Single mode over a maximum of 30 km.
Laser diode
15 db
30 km max
5 km max (dispersion limited)
40 km max
RS-170, NTSC, PAL, SECAM
75 Ohm
> 70 dB
± 0.20 dB
<=1.0%
<=0.4 degrees
<= 10 nS NTSC, <= 15 nS PAL
16.7" x 10.5" x 1.75"
5 lbs
BNC
ST (standard)
- 20C to + 55C case temperature
0 to 95%, non-condensing
15

Advertisement

Table of Contents
loading

Table of Contents