Table of Contents
Advertisement
Quick Links
TRIAD Series
Washdown / Corrosion Resistant
Industrial / Commercial Electric Unit Heater
Owner's Manual
This manual covers installation, operation and maintenance. Read carefully before attempting to
install, operate or service the TRIAD Series Unit Heater.
IMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
INDUSTRIAL ENGINEERING & EQUIPMENT COMPANY
425 HANLEY INDUSTRIAL COURT • ST. LOUIS, MO 63144
314-644-4300 • 800-243-8162 • FAX: 314-644-5332
www.indeeco.com •
sales@indeeco.com
23-2180-83-5
Advertisement
Table of Contents
Related Manuals for Indeeco Triad Series
Summary of Contents for Indeeco Triad Series
-
Page 1: Important Instructions
Industrial / Commercial Electric Unit Heater Owner’s Manual This manual covers installation, operation and maintenance. Read carefully before attempting to install, operate or service the TRIAD Series Unit Heater. IMPORTANT INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE INDUSTRIAL ENGINEERING & EQUIPMENT COMPANY 425 HANLEY INDUSTRIAL COURT •... - Page 2 IMPORTANT INSTRUCTIONS Installation and maintenance personnel should familiarize themselves with this manual and all the IMPORTANT INSTRUCTIONS before installing or working on this heater to avoid potential unsafe conditions, severe property damage, personal injury or death. Read all instructions before installing and 12.
-
Page 3: Installation Instructions
INSTALLATION INSTRUCTIONS RISK OF FIRE / EXPLOSION • This heater should not be used in potentially explosive atmospheres. Do not use in areas where gasoline, paint or flammable liquids are used or stored. • Keep electrical cords, drapery, furnishings, insulation and other combustibles at least 3 feet (0.9m) from the front of the heater and away from the sides, rear and top. - Page 4 INSTALLATION INSTRUCTIONS – Continued Mechanical Installation: Once an acceptable location has been determined, see the These heaters are to be mounted for horizontal discharge following instructions to complete the mechanical only. Mounting is to be accomplished by using either (4) installation: 3/8x16 threaded rods (supplied by others) or the stainless 1.
- Page 5 INSTALLATION INSTRUCTIONS – Continued Ceiling or wall mount using swivel bracket (cont): Optional Ceiling Installation using 4 threaded rods: For ceiling installation using threaded rods, secure the four rods to the ceiling using locknuts. TABLE 4: 4.25” 19.50” 8.50” <= 12 (108mm) (495mm) (216mm)
-
Page 6: Electric Shock Hazard
INSTALLATION INSTRUCTIONS - Continued ELECTRIC SHOCK HAZARD • Electrical installation should be made by a qualified licensed electrician. Wiring procedures, connections and grounding shall be in accordance with the national and local codes having jurisdiction. C. Electrical Installation: Follow these instructions to complete the electrical installation: 1. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS RISK OF FIRE / EXPLOSION • This heater should not be used in potentially explosive atmospheres. Do not use in areas where gasoline, paint or flammable liquids are used or stored. • Keep electrical cords, drapery, furnishings, insulation and other combustibles at least 3 feet (0.9m) from the front of the heater and away from the sides, rear and top. - Page 8 OPERATING INSTRUCTIONS - Continued RISK OF FIRE / EXPLOSION • This heater should not be used in potentially explosive atmospheres. Do not use in areas where gasoline, paint or flammable liquids are used or stored. • Keep electrical cords, drapery, furnishings, insulation and other combustibles at least 3 feet (0.9m) from the front of the heater and away from the sides, rear and top.
-
Page 9: Maintenance Instructions
MAINTENANCE INSTRUCTIONS ELECTRIC SHOCK HAZARD • Potentially lethal voltages are present. Be sure to lock the branch circuit disconnect switch in the OFF position and tag the circuit “Out for Maintenance” before working on this equipment. RISK OF INJURY / BURN •...