Calibration - Micro Audiometrics ES3S User Manual

while 'browsing' through menus). Please see the ES3 Calibration Guide for more
detailed information regarding headset management and calibration.
Specification of headset type should only be done during calibration (i.e., when
selecting which type of earphone is being calibrated). Specification of the Primary
headset type is done via the menu sequence ⌐S ⌐G ⌐P
ETUP ENERAL ERFORM
C (password) ⌐C P ⌐H T {TDH-39/EAR-5A}.
ALIBRATION ALIBRATE RIMARY EADSET YPE
Specification of the Secondary headset type is done via the menu sequence
⌐S ⌐G ⌐P C (password) ⌐C S
ETUP ENERAL ERFORM ALIBRATION ALIBRATE ECONDARY
⌐H T {TDH-39/EAR-5A/None}. If no secondary headset is equipped,
EADSET YPE
'None' should be selected.

CALIBRATION

Micro Audiometrics recommends that audiometers be calibrated annually. About
one month before the annual calibration due date, the ES3 will begin displaying a
reminder at power up that the due date is approaching. This reminder will be
cleared once the instrument is calibrated. If the calibration due date passes and
the instrument has not been calibrated, a caution will be displayed regarding
potential test data invalidation.
Note: If an ES3S audiometer is equipped with the Dual Headset Option, separate
calibration due reminders will occur.
The last calibration date and calibration due dates may be viewed at any time via
the menu sequence ⌐S ⌐G ⌐C D . Please see the ES3
ETUP ENERAL ALIBRATION ATES
Calibration Guide for more detailed information regarding headset management
and calibration.
24