Audica AVR-1 Operation Manual

Audica AVR-1 Operation Manual

Dvd receiver

Advertisement

Operation manual and technical specifications

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVR-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Audica AVR-1

  • Page 1 Operation manual and technical specifications...
  • Page 3: Table Of Contents

    Welcome Thank you for choosing AUDICA Audica AV products have been designed and engineered to the highest standards, combining style with functionality and ergonomics. To extract the best from your system, please refer closely to this manual. It may also be necessary for you to refer to other components’ user guides to prevent any damage or loss in performance which may occur from incorrect installation.
  • Page 4: Read This Before You Begin

    Heed all warnings. Follow all instructions. switch. If you need to switch off the mains power to the AVR-1, Do not use this apparatus near water. remove the mains plug from the wall outlet. For this reason, ensure that the mains plug remains easily accessible when Clean only with a slightly damp cloth.
  • Page 5: Connecting A Tv And Speakers

    Connect the wires from each speaker to the correct labelled to match the position of each speaker as follows - terminals at the rear of the AVR-1 for that speaker. Ensure that the + speaker terminals (coloured red) connect to the top +...
  • Page 6: Optional Connections

    Similarly, you may have another stereo audio-visual source such SCART cable, then no further connection is necessary to listen as a VCR that can be connected to the AUX input of the AVR-1. to TV sound through your AVR-1. If your TV is not using the...
  • Page 7: Front Panel And Handset Controls

    SOURCE SELECT. This key selects the source you want to or headphones connected to the AVR-1. NOTE:- these keys play on the AVR-1 from DVD/CD disc - AUX - OPTICAL - will not change the TV volume. SCARTAUDIO - FM - AM.
  • Page 8: Setting Up The Avr-1

    FRENCH MAIN PAGE ITALIAN SCREEN SAVER sets the screen saver on or GENERAL PAGE off. If the AVR-1 is left in STOP or PAUSE PIC MODE mode for more than 5 minutes, the screen- AUDIO OUT D.R.C. saver will start. We recommend that this is ANGLE MARK set to ON.
  • Page 9 CS-LCR SPEAKER POSITION GENERIC SPEAKER DISTANCE REAR SPEAKER not an Audica, select GENERIC. If you do not SPEAKER TEST TONE REAR C SPEAKER have a speaker in this position (centre and SUBWOOFER rear speakers only), select OFF. If using an...
  • Page 10 Set the VIDEO OUTPUT to match the video VIDEO SETUP connection you made from the AVR-1 to your TV. If you TV DISPLAY connected with a SCART cable, choose RGB. If you TV TYPE RESOLUTION connected with Component Video, choose YPRPB.
  • Page 11 AVR-1 Preferences AUDIO selects the preferred language for PREFERENCES dialogue. ENGLISH AUDIO SUBTITLE GERMAN DISC MENU FRENCH SPANISH PARENTAL ITALIAN PASSWORD DEFAULTS SETUP MENU MAIN PAGE MAIN PAGE GENERAL SETUP SPEAKER SETUP VIDEO SETUP PREFERENCES EXIT SETUP SUBTITLE selects the preferred language PREFERENCES for subtitles.
  • Page 12: Playing A Dvd

    Press the GOTO key. Enter the title or chapter numbers with the NUMBER keys. Use the CURSOR keys to switch between Switch on the AVR-1 and your TV. Select the correct AV input of title/chapter selection. Press the key to go.
  • Page 13: Viewing Jpg Photo Discs

    Playing The Radio PLAYING THE RADIO MANUAL TUNING Switch on the AVR-1. Press the SOURCE key to select the FM or The AVR-1 can also be tuned manually. Press the AM band you require. CURSOR keys to tune manually in steps. Hold down these keys to scan to the next station up or down the band.
  • Page 14: On-Screen Toolbar

    (A point). Press the CURSOR key again when you want to end the loop. The AVR-1 will now play the loop between start and end continually. Press the CURSOR key again...
  • Page 15: Troubleshooting

    You can only play DVD discs purchased in the same region as NO SOUND FROM AN EXTERNAL SURROUND SOUND your player. The region setting for the AVR-1 is marked on the DECODER rear panel and will appear as a number inside a globe. The disc Check that the digital audio output is switched on in the will also carry the same region marking.

Table of Contents