Zagg SOLO Instructions

Positioning
Place the device into the central groove
and lean back. Most devices can be used in
both portrait and landscape mode.
Powering on and pairing your keyboard
The Bluetooth® keyboard should only need to pair to your device
once as follows:
1. On the keyboard, slide the power switch on. The status light
illuminates for four seconds, and then it turns o .
Apple®: Select Settings > General > Bluetooth® > On.
2.
Android™: Apps > Settings > Wireless Networks > Bluetooth®
(to turn on the Bluetooth®.) Then select Bluetooth® Settings >
Find Nearby Devices.
3. Press the Connect button on the keyboard to make it
discoverable. The status light flashes on keyboard and the
device displays "ZAGG Keyboard" as an available device.
4. Select "ZAGG Keyboard" on the device. The device will display
a unique code.
5. Type the code using the keyboard and press Enter. The
keyboard is now paired to the device.
Charge the ZAGG Keyboard
Plug the micro-USB cable into the micro-USB port on the keyboard.
Plug the other end of the cable into a powered USB port on a computer,
your device wall charger, or any other USB compatible charger.
Lights and buttons
Charging light:
Turns on when charging and turns o when fully charged
Status light:
1. Flashes when the battery is low (there's about a 20% charge and
two to four days of use remaining)
2. Flashes when pairing
3. Lights briefly when you turn on the keyboard, and then turns o
Charging light
Status light
Battery
The ZAGG Keyboard uses a long-life, rechargeable battery that gives
you several weeks of normal use. The keyboard goes into sleep
mode if it's left on and not being used. Press any key and wait a
second or two to bring the keyboard out of sleep mode.
The lithium-polymer battery in the keyboard has no memory e ect
and may be charged whenever you wish.
When not in use for a prolonged period, we recommend that you
turn o the keyboard to lengthen the battery life.
Frequently asked questions answered at www.ZAGG.com/solo/faq
status
connect
Bluetooth® button