Summary of Contents for Nexvac RoboVac 200
- Page 1 NEXVAC NEXVAC RoboVac 200 RoboVac 200 Intelligent Automatic RoboVac 200 Robotic Vacuum Cleaner USER MANUAL RoboVac 200 Robotic Vacuum Cleaner Clean Mate 365 REV.A 120813I...
-
Page 2: Table Of Contents
Safety Precautions Table of Contents RoboVac 200 RoboVac 200 Before using this product, please read the following safety instructions and Safety Precautions keep this operation manual for future reference. Safety Instructions Before using this product, please follow all normal safety precautions to avoid the occurrence of situations such as fire, short-circuit, and injury. -
Page 3: Safety Instructions
QQ-1 Safety Instructions Special Features RoboVac 200 RoboVac 200 RoboVac 200 Clean Mate 365 4."MODE"button on the remote control allows you to select a specific cleaning pattern for the RoboVac. By default the unit operate in Automatic 10. When using rechargeable batteries, please use the correct voltage and Mode (switches between all 5 patterns), but by using the "MODE"... -
Page 4: Main Unit And Accessories
Main Unit Features Main Unit and Accessories RoboVac 200 RoboVac 200 Control Panel Description Bumper RoboVac 200 Main Unit Time Set Button Remote Control Remote Control Start/Stop Button Sensor Filter Remote Control Power Button Rechargeable Battery Dust Bin Dust Bin Release... -
Page 5: Control Panel
Control Panel QQ-1 QQ-1 RoboVac 200 Remote Control Functions RoboVac 200 Clean Mate 365 Clean Mate 365 1.Press the power button, the power blue LED will light up. Forward Right 2.Press Timer button to set the length of operation time.The numerical panel will display the operation time. -
Page 6: Battery Installation And Removal
Battery Installation and Removal Remote Control Functions RoboVac 200 RoboVac 200 QQ-1 QQ-1 Clean Mate 365 Clean Mate 365 Press the "Mode" button once to make the unit clean in "Spiral" mode 4. Replace the battery cover by first inserting the tabs into the slots at only. -
Page 7: Recharging The Battery
Installing Accessories Recharging the Battery RoboVac 200 RoboVac 200 QQ-1 Clean Mate 365 Clean Mate 365 NOTES: Side Brush Installation and Removal The battery needs around 2.5 hours recharge time with the fast charger To remove the Side Brush, use a Philips head screwdriver to remove included. -
Page 8: General Operation
General Operation RoboVac 200 Installing Accessories RoboVac 200 Clean Mate 365 Fragrance Installation and Removal Preparing for use This robotic vacuum cleaner has a compartment built into it for adding 1. Make sure you have completely charged the battery before using it fragrance to the air as the unit cleans. -
Page 9: Cleaning And Maintenance
General Operation Cleaning Dust Bin and Air Filter RoboVac 200 RoboVac 200 QQ-1 Stopping Operation 6. Empty the contents of the Dust Bin into a trash can. (Illustration 5) • Rinse the Dust Bin with water if needed. (Illustration • Press the Start/Stop button on the control panel of the unit or press the •... - Page 10 Cleaning the Vacuum Entry RoboVac 200 Cleaning Dust Bin and Air Filter QQ-1 RoboVac 200 Clean Mate 365 Clean Mate 365 After operating the machine for a period of time, dust and dirt will Illustration 3 Illustration 4 Illustration 5 accumulate on the vacuum entry on the bottom of the RoboVac.
-
Page 11: Useful Tips
Useful Tips RoboVac 200 RoboVac 200 Useful Tips QQ-1 Clean Mate 365 Clean Mate 365 Fixing jams: Objects can get caught in the Roller Brush Tip#4 and prevent it from working properly. Immediately turn the Tip#1: Clear the area where the RoboVac is to clean of any items... -
Page 12: Specifications
RoboVac 200 Specifications RoboVac 200 Troubleshooting This trouble shooting guide covers some RoboVac problems that you might have. If problem persists, please contact your local warranty provider or www.infinuvo.com for further assistance. The repairs that marked * needs to be done by qualified service personal. -
Page 13: Warranty Policy
Please fill in your warranty card completely and submit it to your local NEXVAC customer service center. NEXVAC provides you, as the owner of this NEXVAC product, with the 716-A Crown Industrial Ct following Limited Warranty Policy. Chesterfield, MO 63005...
Need help?
Do you have a question about the RoboVac 200 and is the answer not in the manual?
Questions and answers