Table of Contents
Advertisement
Table 4-12.Uncompressed Initialization Codes
Code
7F
80
81
82
83
84
85
86
87
88
89
8B
8C
8D
8F
4-40
BIOS Setup Information
Extended NMI sources enabling is in progress.
The keyboard test has started. Clearing the output buffer and checking for
stuck keys. Issuing the keyboard reset command.
A keyboard reset error or stuck key was found. Issuing the keyboard
controller interface test command.
The keyboard controller interface test completed. Writing the command
byte and initializing the circular buffer.
Command byte written, Global data initialization done. Check for locked
key.
Locked key checking is over. Checking for a memory size mismatch with
CMOS RAM data.
The memory size check is done. Displaying a soft error and checking for
a password or bypassing Setup.
Password checked. About to do programming before Setup.
The programming before Setup has completed. Uncompressing the Setup
code and executing the AMIBIOS Setup utility.
Returned from CMOS Setup program and screen is cleared.
Programming after Setup.
The programming after Setup has completed. Displaying the power on
screen message next.
The first screen message has been displayed. The "[WAIT...]" message
is displayed. Performing the PS/2 mouse check and extended BIOS data
area allocation check.
Programming the Setup options next.
Going for hard disk controller reset.
Hard disk controller reset done. Floppy Setup is next.
(Continued)
Description
Advertisement
Table of Contents
