Table of Contents
Advertisement
I
J
AES-8-Rx Features
A.
SAMPLE RATE (KHz) Allows the user to select one of four commonly used
sample rates. The sample rates are 48, 44.1, 44.056, 32 and EXT. for an
external sampling rate via. the SYNC IN jack.
B.
SYNC IN Female XLR jack is provided for receiving external sampling rates.
C.
SYNC OUT Provides sync signal to other equipment. The rate is determined by
the SAMPLING RATE switch selection.
D.
ACTIVE A signal activity LED for each of the eight channels.
E.
LINK Green LED indicates fiber integrity is good.
F.
SYNC The red LED when lit indicates the unit is not receiving the external sync
signal. This indicator is used when EXT. is selected for the SAMPLING RATE.
G.
SUPPLY INDICATORS Four green LED's show the status of each internal power
supply, -12, +12, -5, +5
H.
POWER SWITCH Routes power to each of the four internal power supplies.
I.
FIBER Fiber-optic input receives optical data from the AES-8 Tx transmitter unit.
J.
POWER INPUT Power receptacle receives 12V DC from a wall mount transformer
or from any 12V power supply. Receptacle is center pin negative.
K.
AES OUTPUTS Male XLR connectors provide eight stereo AES Digital Outputs.
A
B
C
K
Figure 3. AES-8-Rx Front and Rear Features
D
E F
G
Telecast Fiber Systems
H
5
Advertisement
Table of Contents
