Do you have a question about the 8005 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Lincoln 8005
Page 1
Date Code: 5.1.09 For units located in Canada, please contact: For units located in United States, please contact: Garland Commercial Ranges Lincoln Foodservice Products, LLC 1177 Kamato Road 1111 North Hadley Road Mississauga, Ontario L4W 1X4 Fort Wayne, Indiana 46804...
Your 8005 front return toaster is designed to accommodate these varieties of bread products by self-regulating the conveyor speed to create lighter or darker toasting and to allow for toasting thicker products that contain more moisture such as english muffins or fresh bagels.
Use of any other voltage or (60245 IEC 57) (IEC/EN 60335-2-48). altering plug will damage unit, void warranty, and Lincoln requires that the power cord must be: may cause injury. 3 x 4.0mm² 90°C EXTERIOR DIMENSIONS Model 8005 Operator Manual...
INT’L (CE): or fatal injury. If the power supply cord appears to be damaged, do not attempt to operate the WARNING: unit. Contact a service agent or qualified electrician to repair! Model 8005 Operator Manual...
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this CAUTION: appliance must not be supplied through an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off by the utility. Model 8005 Operator Manual...
3. Once the setpoint is reached the display will change to read “P1” (see “Dual Menu Programs” on next page for more information). 4. For peak operation, allow the toaster to warm up for 30 minutes prior to use. Model 8005 Operator Manual...
DUAL MENU PROGRAMS The 8005 Toaster is equipped with two (2) separate menu programs to allow for dual menu settings. These menu programs are shown on the display as “P1” and “P2.” To access each menu, simply press the “1” or “2” button to access the respective menus.
“Up” arrow once. Display will read the current TEMPERATURE INTENSITY setting. The allowable range for TEMPERATURE INTENSITY settings is between 1.0 and 9.9. Display reading the current TEMP INTENSITY setting. TEMP INTENSITY “Up” Button Model 8005 Operator Manual...
3. Once you have reached the desired TIME setting, wait for display to stop blinking. The new setting will be saved into memory once the display has stopped blinking. After the new setting has been saved the display will revert back to “P1” or “P2” menu (depending on which menu program you originally selected). Model 8005 Operator Manual...
Page 11
After the TEMPERATURE INTENSITY setting has been changed, it is important to note that it may take a few minutes for the toaster to complete the conversion to the new setting. The display will read “HI” or “Lo” depending on the type of conversion until it reaches the new setting. Model 8005 Operator Manual...
Page 12
(Range is 00-99) (Default is 80). 3. The new setting will be saved and after a few seconds the display will revert back to the previous view (P1 or P2). Model 8005 Operator Manual...
Page 13
(Range is 0.4 – 9.9) (Default is 1.0). 3. The new setting will be saved and after a few seconds the display will revert back to the previous view (P1 or P2). Model 8005 Operator Manual...
The non-stick coated conveyor belt should be wiped with a soft damp cloth daily to remove any food particles which may collect. DO NOT use abrasive cleaners on the conveyor belt. Model 8005 Operator Manual...
Solution: Contact your authorized service agent immediately for repair. Note: While in error mode, the toaster will continue to operate without the load compensation feature. Adjustments to speed and temperature may be required to maintain toast quality. Model 8005 Operator Manual...
LIMITED WARRANTY – UNITED STATES Lincoln Foodservice Products, LLC (“Lincoln”) warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. During the warranty period, Lincoln shall, at Lincoln’s option, repair, or replace parts determined by Lincoln to be defective in material or workmanship, and with respect to services, shall re-perform any defective portion of said services.
Page 18
This page intentionally left blank. Model 8005 Operator Manual...
Page 19
This page intentionally left blank. Model 8005 Operator Manual...
Need help?
Do you have a question about the 8005 and is the answer not in the manual?
Questions and answers