Button Locations And Functions - MB QUART Nautic Audio WRC-S2 Operation And Installation Manual

CD

Button Locations and Functions

6
1
1. Power On/Off and Display Dimmer: Press to turn the unit on or off. Press and hold to dim the dis-
play. Press and hold again to restore display's illumination.
2. Mode Button:
Press to change the play source: Radio, CD and .Auxiliary Audio Input. Depending on what other input
sources are connected (IPOD, Sirius, USB and CD Changer) these play source will also appear in the
display.
3. Tune/Track Buttons:
Radio Mode: Press either button and the tuner will scan to the next strong station and stop. Then
press and hold either button until "MANUAL" appears in the display then release. Again press either
button until the desired radio station appears in the display.
CD and CD Changer Mode: Press to change the track to a lower or higher track.
4. Enter/Band and Loud Button (ENT BND):
Radio: Press to select AM1, AM2, FM1, FM2 and FM3 radio bands.
Loudness: Press and hold button until "LOUD ON" appears in the display to boost high and low tones
at low volume levels. To deactivate press and hold again until "LOUD OFF" appears in the display.
IPOD Mode: See IPOD Operation Section for more information.
5. Volume Control: Press the
decrease the volume level.
6. CD Play/Pause and Mute Button:
CD and CD Changer Mode: Press to pause disc play, press again to resume play.
Radio, Sirius Satellite Radio and AUX Input Modes: Press to mute volume level. Press again to restore.
7. Menu Button:
Sirius Mode: See Sirius Satellite Radio Operation section for more information.
IPOD Mode: See IPOD Operation section for more information.
8. Display Area: This area displays all function information for the radio, CD player, auxiliary and IPOD
modes.
10
MUTE
DIM
MODE
2 3 5
button to increase the volume level and press the
VOL
LOUD
VOL
S-MOD
iPOD MENU
3
ENT
BND
MENU
7
button to
8
4