About Bluetooth connection 2 Your Docking Speaker What's in the box Overview 3 Get started Charge DS3480 Switch on or off 4 Play Play through the lightning dock Play through Bluetooth Play through an audio cable...
The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth Any changes or modifications made to this SIG, Inc. and any use of such marks by Philips is device that are not expressly approved by under license. Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
U.S. and other countries. With the lightning dock on DS3480, your iPhone/ iPod can work with the following app: Compliance • ClockStudioapp (allows you to select...
DS3480. • Increase or decrease the volume » When the battery is full, the is • Power on/off indicators always on in green if DS3480 is on; the turns off if DS3480 is off.
Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. Play through the lightning dock Switch on or off With the lightning dock on DS3480, you can play from the following iPhone/ iPod: • Press to switch on. •...
Connect through Bluetooth On DS3480, press to switch on. » The Bluetooth status indicator flashes. DS3480 starts to pair or reconnect through Bluetooth. » Next time you switch on DS3480, the speaker connects to the last paired device automatically. • To connect DS3480 to another Bluetooth device, switch off Bluetooth on current Bluetooth device.
Make sure the distance between DS3480 and the play and change the volume. Bluetooth device is within 10 meters. • The music streaming may be interrupted by obstacles between the device and DS3480, such as walls, or other devices nearby that operate in the same frequency.
» When you reach the maximum or minimum level, , flashes in amber. With the lightning dock on DS3480, you can charge your iPhone/ iPod when music play is on or off. Mount your iPhone/ iPod onto the lightning dock on DS3480.
Humidity for all climates. Storage temperature -40 °C to 70 °C, 5% to and humidity: Follow onscreen instructions to complete firmware updating. Bluetooth Note • During the firmware updating, keep the iPhone/ iPod Bluetooth version V2.1+ EDR powered on and docked on DS3480. Frequency band 2.402-2.480 GHzISM Band Rang 10m (free space)
If the problem enabled. Refer to the user manual of the remains unsolved, go to the Philips web site device on how to enable the Bluetooth (www.philips.com/support). When you contact function. Philips, ensure that the apparatus is nearby • The speaker is not in the pairing mode.