LG LRN8240D Series Simple Manual page 2

Front Panel and Remote Control
Front Remote
Panel Control
NET OSD PTZ
1
HDD INFO ALM.OFF
NET OSD
5
Turns on or off. Press and hold for more than 2 seconds to turn on or off.
1
ALARM LOG
9
HDD INFO
BACK UP COPY 5 MARK
NET OSD PTZ
Pauses playback.
ALARM 1 LOG
9
HDD INFO ALM.OFF
NET OSD BACK UP 5 PTZ COPY
Searches the recorded images in reverse or skips the recorded images.
1 2
ALARM LOG
HDD INFO ALM.OFF
9
5 6
NET OSD BACK UP PTZ COPY FOCUS+ MARK
Playback or reverse playback of recorded images.
ALARM LOG
1 2 3
9 0
HDD INFO ALM.OFF FOCUS -
BACK UP COPY MARK
NET OSD 5 PTZ 6 FOCUS+ 7 IRIS+
Forward searches the recorded images or skips the recorded images.
1 2 3 4
ALARM LOG SET
HDD INFO ALM.OFF FOCUS - IRIS -
9 0
5 6 7 8
BACK UP COPY MARK MOVE
Stops playback.
ALARM LOG SET CLEAR
9 0
NET OSD PTZ FOCUS+ IRIS+ BACK UP COPY MARK MOVE TOUR
FOCUS+ IRIS+
1 2 3 4
You can input a number with channel buttons.
3 HDD 4 INFO ALM.OFF FOCUS - IRIS -
-
5 6 7 8
FOCUS - ALARM IRIS - LOG SET CLEAR Note: You can also use the channel buttons for sub-function with SHIFT button.
9 0 SHIFT
7 8
BACK UP COPY MARK MOVE TOUR
SET CLEAR
SHIFT
- If you use the Sub-function of the channel button, the button is activated.
REC
SEARCH SETUP
MOVE TOUR
LOG-IN VIEW CAM BACK
NET OSD PTZ FOCUS+ IRIS+ Accesses or minimizes the System Control Bar (OSD).
1 2 3 4
HDD INFO ALM.OFF FOCUS - IRIS -
Switches this unit to PTZ mode to control the connected PTZ camera.
NET OSD PTZ FOCUS+ IRIS+ SEARCH SETUP
5 6 7 8
OSD PTZ FOCUS+ IRIS+
1 2 3 4
LOG-IN VIEW CAM BACK
1 2 3 4
ALARM LOG SET CLEAR
HDD INFO ALM.OFF FOCUS - IRIS -
9 0 SHIFT
INFO PTZ ALM.OFF FOCUS+ FOCUS - IRIS+ IRIS - Adjusts focus position.
5 6 7 8
PTZ FOCUS+ IRIS+
5 2 BACK UP 6 3 COPY 7 4 MARK 8 MOVE TOUR
ALARM 2 LOG 3 4 SET CLEAR
LOG ALM.OFF FOCUS - SET IRIS - CLEAR
9 0 SHIFT
Adjust iris position.
ALM.OFF FOCUS+ FOCUS - IRIS+ IRIS -
9 6 0 7 8 SHIFT
NET OSD PTZ FOCUS+ IRIS+
BACK UP 6 3 COPY 7 4 MARK 8 MOVE TOUR
COPY MARK SET 1 MOVE CLEAR 2 TOUR 3 4
FOCUS - SET IRIS - CLEAR
0 SHIFT
HDD INFO ALM.OFF FOCUS - IRIS - Displays the system information.
SHIFT
0 7 8
NET OSD PTZ FOCUS+ IRIS+
5 6 7 8
MARK MOVE TOUR LOG-IN
NET OSD PTZ FOCUS+ IRIS+
MARK SET 1 MOVE CLEAR 2 TOUR 3 4
1 2 3 4
ALARM LOG SET CLEAR
SHIFT
Cancels alarm activation and returns the system to the condition before the alarm was activated. SEARCH SETUP
HDD INFO ALM.OFF FOCUS - IRIS -
9 0 SHIFT
SEARCH SETUP
HDD INFO ALM.OFF FOCUS - IRIS -
5 6 7 8 LOG-IN
OSD MOVE PTZ TOUR FOCUS+ IRIS+
BACK UP COPY 5 MARK 6 MOVE 7 TOUR 8 LOG-IN
1 2 3 4
ALARM LOG SET CLEAR
ALARM LOG SET CLEAR SEARCH Displays the System Log List. SETUP
9 0 SHIFT
INFO ALM.OFF FOCUS - IRIS - SEARCH SETUP
SHIFT
9 0 LOG-IN VIEW
PTZ FOCUS+ IRIS+
5 6 7 8 LOG-IN VIEW
BACK UP COPY MARK MOVE TOUR
NET OSD PTZ FOCUS+ IRIS+
2 3 4
BACK UP COPY MARK MOVE TOUR
LOG SET 1 CLEAR 2 3 SEARCH 4 SETUP Registers the PTZ camera's preset position.
ALM.OFF FOCUS - IRIS -
SHIFT
9 0 LOG-IN VIEW CAM
HDD INFO ALM.OFF FOCUS - IRIS -
6 7 8 LOG-IN
NET OSD PTZ FOCUS+ IRIS+
COPY MARK MOVE 5 TOUR 6 7 8
1 2 3 4
SET CLEAR Deletes a memorized preset position.
ALARM LOG SET CLEAR SEARCH SETUP
0 SHIFT
HDD INFO ALM.OFF FOCUS - IRIS -
9 0 SHIFT
LOG-IN
OSD PTZ FOCUS+ IRIS+
5 6 7 8 LOG-IN
MARK MOVE TOUR
1 BACK UP 2 COPY 3 MARK 4 MOVE TOUR Displays the export menu.
ALARM LOG SET CLEAR
INFO ALM.OFF FOCUS - IRIS - SEARCH SETUP
9 0 SHIFT
PTZ FOCUS+ IRIS+ LOG-IN VIEW
5 6 7 8
BACK UP 2 COPY 3 MARK 4 MOVE TOUR Sets the mark point for recording search.
LOG SET CLEAR
SEARCH SETUP
ALM.OFF FOCUS - IRIS -
9 0 SHIFT
6 7 8 LOG-IN VIEW CAM
Moves the camera to the preset position. LOG-IN
COPY MARK MOVE TOUR
SET CLEAR
0 SHIFT SEARCH SETUP
IRIS+
LOG-IN
MARK MOVE TOUR Tours all registered preset positions in the camera.
4
IRIS+
IRIS - 4 SEARCH SETUP
IRIS - 8
LOG-IN VIEW
8 Zooms in/out on playback window.
CLEAR
SHIFT
SEARCH SETUP
SHIFT
TOUR
LOG-IN • wsad: Select or move between the menu options. VIEW CAM
FOCUS+ IRIS+
3 4
FOCUS - IRIS -
7 8
SET SHIFT CLEAR REC REC
SEARCH SHIFT SETUP SEARCH SETUP • OK: Confirms menu selections.
MOVE TOUR
LOG-IN LOG-IN VIEW CAM BACK VIEW CAM BACK
REC REC
SEARCH SETUP
LOG-IN VIEW CAM BACK SEARCH SETUP
Displays the User Log-In dialog box or logs out.
LOG-IN VIEW CAM BACK
REC
SEARCH SETUP Displays the search menu.
LOG-IN VIEW CAM BACK
REC
SEARCH SETUP
Displays the setup menu.
LOG-IN VIEW CAM BACK
REC
SEARCH SETUP
Displays the split mode menu.
VIEW CAM BACK
REC
SETUP
Displays the Monitor menu to set the first camera channel.
VIEW CAM BACK
REC
Exits the menu or returns to the previous screen.
VIEW CAM BACK
REC
Starts or stops instant recording.
VIEW CAM BACK
- To select the PTZ preset number, ID or channel.
Set the appropriate system ID to operate via the IR Remote Controller when using the multiple system. Press
- the ID button then press the number button within 2 seconds to select the system ID of the system. If you set
the system ID to "0", you can control multiple system at the same time.
Description
FOCUS+ IRIS+
2 3 4
FOCUS - IRIS -
PTZ FOCUS+ IRIS+
6 7 8
2 3 4
SET CLEAR
0 SHIFT
ALM.OFF FOCUS - IRIS -
MOVE 6 TOUR 7 8
FOCUS+ IRIS+
2 3 SET 4 CLEAR
0 SHIFT
FOCUS - IRIS -
REC
SEARCH SETUP
6 FOCUS+ MARK 7 IRIS+ MOVE 8 TOUR
LOG-IN VIEW CAM BACK
3 4
SET CLEAR
FOCUS - IRIS -
0 SHIFT
7 8
IRIS+ MOVE TOUR
SET CLEAR
4 SEARCH SETUP
SHIFT
LOG-IN VIEW
IRIS -
MOVE TOUR
8
CLEAR
SEARCH SETUP
SHIFT
LOG-IN VIEW CAM
TOUR
SEARCH SETUP
SHIFT
LOG-IN VIEW CAM BACK
REC
SEARCH SETUP
LOG-IN VIEW CAM BACK
REC
SEARCH SETUP
LOG-IN VIEW CAM BACK
REC
REC
SEARCH SETUP
VIEW CAM BACK
REC
REC
VIEW CAM BACK
VIEW CAM BACK
REC
REC
CAM BACK
CAM BACK
REC
REC
SEARCH SETUP
BACK
VIEW CAM BACK
REC
REC
SEARCH SETUP
VIEW CAM BACK
VIEW CAM BACK
REC
CAM BACK
REC
REC
SEARCH SETUP
BACK
VIEW CAM BACK
REC
VIEW CAM BACK
REC
CAM BACK
REC
BACK
Setup Wizard
The Setup Wizard appears on the screen when you turn on the unit for the first time or select [Setup Wizard] on the Setup menu. You can set the
system name, display language, data, time, network settings, recording schedule and recording mode on the initial setup wizard.
REC
CAM BACK
REC
BACK
REC
Step 1
Set system name and display language.
• System Name: Enter the system name by using alphabetic letter, numeric digit and symbols
up to 21 characters. The number of maximum characters is depends on the language.
• Language: Select a language for the setup menu and information display.
Step 2
Set date and time.
• Date: Select the current year, month and day.
• Time: Select the current time.
• Date Format: Select the date display format.
• Time Format: Select the time display format.
• Time Zone: Select the time zone in the area where the System is installed.
• Daylight Saving: Mark up when you use the daylight saving function.
• Daylight Saving Start: Select the Daylight Saving start time.
• Daylight Saving End: Select the Daylight Saving end time.
Step 3
Set network address for LAN ports.
• Interface: Select a LAN port you want to use (Ethernet 0).
• DHCP: Select this option when a DHCP server is installed on the network to allow IP address
assignment. With this setting, the IP address is assigned automatically.
• IP Address: Enter the IP address.
• Subnet Mask: Enter the subnet mask address.
• Gateway: Enter the gateway address.
• Primary DNS: Enter the Primary domain name server that translates the hostnames into IP
address.
• Secondary DNS : Enter the Secondary DNS server address that backups the Primary DNS.
Step 4
Set recording schedule.
• Weekday: Sets the recording mode to weekday (Mon-Fri).
• Weekend: Sets the recording mode to weekend (Sat-Sun).