Bluetooth-habilitado - completo control de ipod reproductor de tablero dvd/mp3/cd con pantalla tft 7" (178mm) tactil motorizada y retractil con dos puertos 2 puertos usb (delantero y trasero) puerto de tarjeta de memoria sd y entrada av en panel frontal (46 pages)
In-dash dvd/mp3/cd am/fm receiver with motorized flip-out 7"(178mm) touchscreen widescreen digital tft monitor with usb and sd memory card ports and front panel aux input (10 pages)
Bluetooth -enabled full ipod control built in navigation in dash double din dvd /mp3/cd am/fm receiver with 7.0 widescreen touchscreen tft digital monitor with usb and sd memery card port and front panel aux input rds compatible model (10 pages)
Bluetooth enabled full ipod control in-dash dvd/mp3/cd am/fm receiver with motorized flip-out 7" (178mm) touchscreen widescreen digital tft monitor with dual (front and rear) usb and sd memory card port and front panel aux input (10 pages)
Bluetooth-enabled full ipod control in-dash dvd/mp3/cd am/fm receiver with motorized flip-out 7" (178mm) touchscreen widescreen digital tft monitor with dual (front and rear) usb and sd memory card port and front panel aux input (10 pages)
In-dash dvd/mp3/cd receiver with motorized flip-out 7" widescreen touchscreen digital tft monitor, with usb and sd memory card ports and front panel aux input (14 pages)
In-dash dvd/mp3/cd receiver with motorized, flip-out 7" widescreen touch sceen digital tft monitor with usb and sd memory cards ports and front panel aux inputs (14 pages)
Bluetooth-enabled in-dash dvd/mp3/cd am/fm receiver with motorized flip-out 7" 178mm touchscreen widescreen digital tft monitor with usb nd sd memory card ports and front panel aux input (10 pages)
BV9955 AM/FM DVD Receiver with 7” TFT Display U S E R ’ S M A N U A L CONTENTS Installation To support the unit Detaching and attaching the front panel Moving the screen forward Cleaning the connector Wire Connection...
Page 4
Before installing your new DVD Receiver, please review the items below carefully. Use only the installation parts and hardware provided with the unit to ensure proper installation. Using other parts can cause malfunction and possible damage to your DVD receiver. affect performance.
INSTALLATION PRECAUTIONS • Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
To detach To attach 1. Slide the screen release button Push and insert the screen all to the right side. the way down until you heard 2 2. Hold the display by the trim click sounds indicating both hole (not screen). Gently lift the connector is attached properly.
Page 7
CONTROL WIRE Parking (Gray) : Connect this wire to car hand brake system Auto Antenna/Remote Control (Blue) : Rear Camera (Red) : Connect to back rear camera During back gear condition, this wire should be connected to hight voltage. ISO CONNECTOR A 4.
Locations of parts and controls (Main unit) 1. POWER ON/OFF ( 2. SELECT FUNCTION BUTTON 3. EQUALIZER / ‘AF’ function BUTTON (ALTERNATIVE FREQUENCIES) 4. LOUDNESS / ‘TA’ function BUTTON (TRAFFIC ANNOUNCEMENT) 5. PAL / NTSC SYSTEM / ‘PTY’ function (PROGRAM TYPE) 6.
Use and care of the remote control Installing the battery Slide the tray out on back of the remote control and insert battery with the (+) and minus (-) poles pointing in the proper direction. • When use for the first time, pull out the film protruding the tray. CAUTIONS •...
Equalizer (EQ) Main Unit: On main menu, touch SETTINGS > EQ SETTINGS. Under Dsp-preset, select by touching the desired EQ setting. On main unit, press the EQ button. Remote: Press EQ button. Under Dsp-preset, select the desired EQ by pressing ( Subwoofer Press EQ button to EQ setting, select SUBWOOFER On/Off by pressing ( CLOCK...
Storing and Recalling Frequencies Currently Tuned Station If you press any of the NUMBER (1-6) you can easily store up to six broadcast frequencies for later recall with the touch of a button. 1. Choose a desired BAND. 2. When you find a frequency that you want to store in memory, press a NUMBER(1-6) and hold until the preset number shows and lit in the display.
Stopping Playback 1. Press Stop on remote control during playback to stop playback. That position is stored in memory. 2. Press to continue. Playback starts from the position at which it was stopped. Note: Music playback has no stop function.Use button to pause playback.
TITLE During music playback, press TITLE on remote to return to audio file lists. AUX IN An external audio source (e.g. portable MP3 player) can be connected to the AUX IN socket to be played back by the vehicle loudspeakers. 1.
Page 14
FOR DVD You can choose between repeat playback of a title or chapter. 1. Press REPEAT on the remote control during playback. 2. Every time you press this button, the unit switches to the following settings: Repeat Title – Repeat the current playback title. Repeat Chapter –...
Frame-by-frame playback This lets you move ahead one frame at a time during playback. 1. Each time you press and hold Step button on remote control, you move ahead one frame. To return to normal playback, press PAL / NTSC (P/N) Press and hold P/N button to switch between PAL, NTSC system.
SETTING UP THE DVD PLAYER You can flexibly customize the unit to suit your preference. You can set the language and other video and audio settings so when playback starts it will always use your preferred settings. Important: 1. Load any disc into the unit before you can access the setup. 2.
Specifications BV9955 AM/FM DVD Receiver with 7” TFT Display CD/MP3 PLAYER Signal to noise ratio > 60 dB > 50 dB (1kHz) Channel separation Frequency response 20Hz - 20 kHz RADIO FM Section: Frequency range 87.5 - 107.9 MHz (America), 87.5-108 MHz (Europe)