Charging Station Operation - Brookstone Large Charging Valet Owner's Manual

chaRGInG sTaTIon oPeRaTIon

charging statiOn set-up
1 . Remove the unit's REAR TRAY COVER from the top of the MAIN UNIT
and remove the ADAPTER, 4-PORT USB POWER HUB and all the
CHARGING TIPS from the inner compartment and unwrap .
2 . Run the small end of the ADAPTER cord through the ACCESS HOLE and
into the LARGE COMPARTMENT of the MAIN UNIT .
3 . Plug the small end of the ADAPTER into the 4-PORT USB POWER HUB
which you have placed back on the inside of the LARGE COMPARTMENT .
9